ATL05CA124
2005-07-02 · Lanett, Alabama, United States · None · 1 aircraft · Status: Completed
Airport 7A3
Current FAA registration · N9133M
- Make / Model
- CESSNA 182P
- Year of manufacture
- 1976 · 29 years old at event
- Engine
- CONT MOTOR O-470 SERIES (230 hp)
- Seats / Engines
- 4 seats · 1 engine
- Last airworthiness date
- 19760421
- ADS-B equipped
- Yes — Mode-S ACA49D
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilot's misjudgment of speed and distance, and his failure to do a go around. A factor was the wet runway.
Factual narrative
On June 19, 2005, approximately 1400 central daylight time, a Cessna 182P airplane, N9133M, registered to and operated by an instrument pilot, collided with the ground at Lanett Municipal Airport, in Lanett, Alabama. The personal flight was operated under the provisions of Title 14 CFR Part 91 with an instrument flight rules (IFR) flight plan filed. Visual meteorological conditions prevailed. The instrument pilot and his passenger received no injuries, and the airplane sustained substantial damage. The flight departed DeKalb-Peachtree Airport, Atlanta, Georgia , at approximately 1400 eastern daylight time. The pilot was in the process of completing a routine cross country flight from Atlanta, Georgia, to Lanett, Alabama, when the pilot canceled his instrument flight rules (IFR) clearance upon seeing Lanett airport. The pilot entered left traffic and proceeded to execute a visual approach for runway 8. He entered a left downwind for runway 8 and upon making a left turn to final, the pilot stated that his approach profile was "too high". The pilot stated the airplane crossed the threshold at about 200 feet and 80 knots. The airplane proceeded to fly down the remainder of runway touching down with 1,000 feet of runway remaining. On landing the pilot applied brakes and attempted to stop the airplane on the wet runway. The airplane began to skid and failed to stop subsequently the airplane overran the end of the runway 8 and the traveled down an embankment. The pilot reported no mechanical malfunctions with the aircraft. Post-accident examination revealed that control surfaces were intact, the nose gear was detached from the airplane, and the airplane was resting in a patch of bushes. Upon arriving at the destination airport the pilot canceled the instrument flight plan and proceeded to execute a visual approach to land on runway 8. The pilot stated that his final approach profile was "too high" and the airplane crossed the threshold about 200 feet at 80 knots. The airplane touched down on the runway about 1000 feet from the departure end. Efforts to stop the airplane by the pilot failed, and the airplane rolled off the departure end of the runway and collided with an embankment. No mechanical problems were reported by the pilot. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2005_ATL05CA124.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗