ATL98LA011
1997-11-21 · ATHENS, Georgia, United States · Minor · 1 aircraft · Status: Completed
Airport AHN
Aircraft involved
Probable cause & findings
the pilot's improper in-flight planning/decision by attempting to land in weather that was below minimums, and his failure to attain a suitable touchdown point on the runway. Weather below landing minimums was a related factor.
Factual narrative
On November 21, 1997, about 1322 eastern standard time, a Beech 60, N202RS, overran the departure end of runway 27 and skidded down an embankment collapsing the nose gear at Athens/Ben Epps Airport in Athens, Georgia. The airplane was operated under the provisions of Title 14 CFR Part 91 and instrument flight rules. Instrument meteorological conditions prevailed. The instrument rated private pilot was not injured, and the pilot rated passenger received minor injuries. The airplane was substantially damaged. The flight originated from Witham Field in Stuart, Florida with an instrument flight plan at 1030. According to the pilot, as he approached Athens, the controller indicated to him that the ceiling was 600 feet and the visibility was 3 miles. He decided to proceed on the ILS 27 approach. At the minimum descent altitude (MDA), 200 feet, the pilot stated he saw the airport and touched down. The pilot stated when he applied the brakes "nothing happened". He believed they were hydroplaning. The pilot did not believe he had runway left to execute the go-around, so he attempted to stop in the remaining runway. The airplane continued off the departure end of runway 27 and skidded down an embankment collapsing the nose gear in soft terrain. The pilot reported no mechanical problems with the airplane. According to the Air Traffic Controllers involved, they issued the clearance to land after giving the pilot the weather. They stated the ceiling was 200 feet overcast, and the visibility was 1/4 of a mile. The pilot continued the approach. Both controllers stated the airplane broke out of the clouds at approximately the midpoint of the runway. It then made a "quick descent" in an attempt to land. They stated the airplane touched down at approximately the 1500 foot remaining point of the 5522 foot runway. After it touched down, the controllers were unable to see the airplane, due to the poor visibility. The weather at Athens Airport was 200 feet overcast and 1/4 mile visibility with drizzle and fog. The ILS approach minimums for runway 27 was 200 feet and 3/4 mile visibility. After completing an ILS approach to runway 27, the aircraft touched down at approximately the 1500 foot remaining point of the 5522 foot runway. The airplane continued off the departure end of runway 27 and skidded down an embankment, collapsing the nose gear in soft terrain. According to air traffic controllers, the pilot continued the approach after being issued the weather. The weather was 200 feet overcast and 1/4 mile visibility. Landing minimums for the approach were 200 feet and 3/4 mile visibility. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1997_ATL98LA011.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (go-around). All research papers
- NASA NTRS 2024 · Conference Paper Al6061-RAM2 Development and Hot-Fire Testing using Additive Manufacturing Laser Powder Directed Energy Deposition for Liquid Rocket Engine Channel-Cooled Nozzles
Aluminum 6061-RAM2 is a high-strength aluminum feedstock developed for additive manufacturing (AM)processes. This alloy leverages Reactive Additive Manufacturing (RAM) technology.
- NASA NTRS 2024 · Presentation Al6061-RAM2 Development and Hot-Fire Testing using Additive Manufacturing Laser Powder Directed Energy Deposition for Liquid Rocket Engine Channel-Cooled Nozzles
Aluminum 6061-RAM2 is a high-strength aluminum feedstock developed for additive manufacturing (AM)processes. This alloy leverages Reactive Additive Manufacturing (RAM) technology.
- arXiv 2022 · arXiv preprint Zero Touch Coordinated UAV Network Formation for 360° Views of a Moving Ground Target in Remote VR Applications
Unmanned aerial vehicles (UAVs) with on-board cameras are widely used for remote surveillance and video capturing applications.
- NTSB Aircraft Accident Reports 2022 · Accident report Loss of Control on Takeoff in Icing Conditions — Citation 560XL
Cessna Citation 560XL fatal takeoff icing accident, March 2018. Investigation of a Citation 560XL loss-of-control takeoff accident in icing conditions.
- NASA NTRS 2019 · Technical Memorandum (TM) Fidelity assessment of a UH-60A simulation on the NASA Ames vertical motion simulator
Helicopter handling qualities research requires that a ground-based simulation be a high-fidelity representation of the actual helicopter, especially over the frequency range of the investigation.
- NASA NTRS 2019 · Other Differential Pressures on a Pitot-venturi and a Pitot-static Nozzle over 360 Degrees Pitch and Yaw
Measurements of the differential pressures on two navy air-speed nozzles, consisting of a Zahm type Pitot-Venturi tube and a SQ-16 two-pronged Pitot-static tube, in a tunnel air stream of fixed speed …