CEN14LA333
2014-07-01 · Joplin, Missouri, United States · None · 1 aircraft · Status: Completed
Airport JLN
Current FAA registration · N468CM
- Make / Model
- CESSNA 172R
- Year of manufacture
- 2000 · 14 years old at event
- Engine
- LYCOMING I0360 SER (180 hp)
- Seats / Engines
- 4 seats · 1 engine
- Last airworthiness date
- 20000215
- ADS-B equipped
- Yes — Mode-S A5B791
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The partial loss of engine power for reasons that could not be determined because an operational test run of the engine did not reveal any anomalies that would have precluded normal operation.
Factual narrative
On July 1, 2014, about 1726 central daylight time, a Cessna model 172R airplane, N468CM, was substantially damaged during a forced landing at the Joplin Regional Airport (JLN), Joplin, Missouri. The private pilot was not injured. The airplane was registered to and operated by University of Central Missouri under the provisions of 14 Code of Federal Regulations Part 91 without a flight plan. Day visual meteorological conditions prevailed for the instructional cross-country flight that departed from Downtown Airport (3DW), Springfield, Missouri, about 1700.The pilot reported that he was cleared for the option landing on runway 31 (6,501 feet by 150 feet, asphalt) and that the prevailing wind was aligned with the runway heading at 11 knots. The pilot stated that he performed a touch-and-go landing. He reported that he made an uneventful landing and that shortly after the following takeoff, during initial climb, the engine "grumbled" and began to "cut in and out." The pilot immediately told the tower controller that the airplane had an engine issue, reduced engine power, and fully extended the wing flaps for a landing on the remaining runway. During the landing roll, the airplane overran the end of the runway before it collided with a light pole associated with the runway approach lighting system. Following the accident, the pilot was able to taxi back onto runway, under normal engine power, before he shut down the engine on a nearby taxiway. The right wing was substantially damaged during the on-ground collision with the light pole. A postaccident examination was completed by the airplane operator's chief pilot and the director of maintenance. Their examination established that the airplane fuel system contained about 42 gallons of 100 low-lead aviation fuel that was evenly distributed between the two wing fuel tanks. An external examination of the engine did not reveal any anomalies or fluid leaks. The oil quantity dip-stick established that the engine contained about 8 quarts of oil. The engine was started by following the normal checklist procedure, and then demonstrated the ability to develop takeoff power during an operational test run. No hesitation or engine roughness was experienced during the operational test run. The engine responded to corresponding throttle movements throughout the test run. A functional magneto check did not reveal any anomalies with engine operation. Following the operational test run, there were no fluid leaks observed on the engine exterior. The postaccident operational test run did not reveal any anomalies with the engine, a fuel-injected Lycoming model IO-360, that would have prevented normal operation. The pilot stated that the accident occurred as he was completing a touch-and-go landing following a cross-country flight. He reported that, after an uneventful landing and during the subsequent initial climb, the engine "grumbled" and began to "cut in and out." The pilot immediately told the airport tower controller that the airplane had an engine issue, reduced engine power, and fully extended the wing flaps for landing on the remaining runway. During the landing roll, the airplane overran the end of the runway before it collided with a light pole associated with the runway approach lighting system. Following the accident, the pilot was able to taxi the airplane back onto the runway, under normal engine power, before he shut down the engine on a nearby taxiway. A postaccident examination established that the fuel system contained about 42 gallons of aviation fuel that was evenly distributed between the two wing fuel tanks. The engine was started by following the normal checklist procedure, and it developed takeoff power during an operational test run. No hesitation or engine roughness was experienced during the operational test run, and the engine responded to corresponding throttle movements throughout the test run. Thus, the postaccident operational test run did not reveal any anomalies with the fuel-injected engine that would have prevented normal operation. The reason for the partial loss of engine power could not be determined. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
NTSB Findings
FAA avdata. C = Cause, F = Factor.
- C Not determined-Not determined-(general)-(general)-Unknown/Not determined - C
- — Environmental issues-Physical environment-Object/animal/substance-Runway/taxi/approach light-Contributed to outcome
Verbatim from NTSB's published report. Source file
NTSB_2014_CEN14LA333.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (maintenance). All research papers
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA) From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- Semantic Scholar 2026 · Article (Reliability Engineering & System Safety) Understanding human error in military aviation maintenance: The role of Performance shaping factors, cognitive workload and error orientation
- Semantic Scholar 2025 · Article (Applied Sciences) Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Semantic Scholar 2024 · Article (Defence Science Journal) Modelling of Human Factors in Aviation Maintenance Using HFACS ME Human Factors Analysis and Classification System Maintenance Extension and Bayesian Network
Aircraft maintenance is a complex task involving a skilled human workforce, spare parts, and various other resources. Human factors are an inherent element of the human workforce.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…