Skip to content

DEN07CA086

2007-04-11 · Watkins, Colorado, United States · None · 1 aircraft · Status: Completed

Airport FTG

Current FAA registration · N1258D

Make / Model
CESSNA 170A
Year of manufacture
1951 · 56 years old at event
Engine
CONT MOTOR C145 SERIES (145 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19551130
ADS-B equipped
Yes — Mode-S A069B9

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

A total failure during landing roll of the right brake caused by severely worn shoes, causing the caliper pins to engaged misaligned. A contributing factor was the pilot's inability to maintain directional control.

Factual narrative

On April 11, 2007, approximately 1430 mountain daylight time, a Cessna 170A, N1258D, piloted by an airline transport-certificated pilot, was substantially damaged when the right brake failed and the airplane veered to the right and departed runway 35 at Front Range Airport (FTG) Watkins, Colorado. Visual meteorological conditions prevailed at the time of the accident. The personal flight was being conducted under the provisions of Title 14 CFR Part 91 without a flight plan. The pilot was not injured. The local flight originated approximately 1340. The pilot had been practicing touch-and-go landings. On his final landing, the airplane swerved to the right and the right wing struck the ground, bending the spar. The airplane then departed the runway. According to the FAA airworthiness inspector who examined the airplane, the right brake caliper assembly showed "severely worn shoes with uneven wear." The inspector surmised that when the pilot applied the brakes, the uneven brake shoe wear "caused the caliper pins to engage misaligned, contacting the rotor, locking and shearing the caliper assembly." The pilot had been practicing touch-and-go landings. On his final landing, the airplane swerved to the right and the right wing struck the ground, bending the spar. The airplane then departed the runway. According to the FAA airworthiness inspector who examined the airplane, the right brake caliper assembly showed "severely worn shoes with uneven wear." The inspector surmised that when the pilot applied the brakes, the uneven brake shoe wear "caused the caliper pins to engage misaligned, contacting the rotor, locking and shearing the caliper assembly." Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2007_DEN07CA086.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

Matched on aircraft type or causal vocabulary (icing). All research papers