FTW00LA174
2000-06-06 · GREENVILLE, Texas, United States · None · 1 aircraft · Status: Completed
Airport GVT
Aircraft involved
Probable cause & findings
The pilot's failure to maintain directional control during the landing roll, which resulted in an inadvertent ground loop.
Factual narrative
On June 6, 2000, at 1342 central daylight time, a Luscombe 8A airplane, N45880, was substantially damaged while landing at the Majors Airport, Greenville, Texas. The private pilot, who was the registered owner and operator, and his passenger were not injured. Visual meteorological conditions prevailed for the 14 Code of Federal Regulations Part 91 personal flight, for which no flight plan was filed. The local flight originated from the Majors Airport at 1215. According to the pilot, he flew the airplane in the practice area approximately 1 hour 15 minutes and then returned to Majors Airport to terminate the flight. The pilot reported that the touchdown on runway 35 was "smooth and uneventful;" although, when he "applied forward pressure to 'stick' the wheel landing," the airplane "turned hard right," to an easterly heading. The pilot applied power in an attempt to regain control of the airplane; however, the airplane continued turning to the right to a westerly heading, and exited the runway surface. The airplane then contacted soft terrain and nosed over coming to rest inverted. The pilot added that the winds were from 060 degrees at 8 knots. According to the FAA inspector and the pilot, the right wing sustained structural damage, including the wing spar and wing strut. The engine mounts were damaged. They added that the right main landing gear fractured in two locations. The first point of separation occurred approximately 1/2 inch above the step, and the second point of separation occurred at the base of the landing gear assembly, at the wheel axle attaching point. The fracture surfaces were examined, by the NTSB Investigator-In-Charge, with a low power binocular microscope. The fracture surfaces located above the step exhibited bending deformation and 45 degree shear planes, consistent with an overstress separation. The fracture surface at the base of the landing gear, near the collar, also exhibited 45 degree shear planes, consistent with an overstress separation. The pilot reported that the touchdown on runway 35 was 'smooth and uneventful;' although, when he 'applied forward pressure to 'stick' the wheel landing,' the airplane turned 'hard right,' to an easterly heading. He applied power in an attempt to regain control of the airplane; however, the airplane continued turning to the right to a westerly heading, exited the runway surface, and nosed over. The pilot added that the winds were from 060 degrees at 8 knots. The right main landing gear was fractured in two locations. Examination of the fractures revealed signatures indicative of overstress separation. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2000_FTW00LA174.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type. All research papers
- Embry-Riddle Scholarly Commons 2020 · Conference paper Concurrent Sessions: Session 8A - Technology in Aviation
- arXiv 2020 · arXiv preprint Continuation Method with the Trusty Time-stepping Scheme for Linearly Constrained Optimization with Noisy Data
The nonlinear optimization problem with linear constraints has many applications in engineering fields such as the visual-inertial navigation and localization of an unmanned aerial vehicle maintaining…