FTW98LA323
1998-07-17 · CANON CITY, Colorado, United States · Serious · 1 aircraft · Status: Completed
Airport 1V6
Aircraft involved
Probable cause & findings
The pilot's misjudgment of distance/altitude and his premature deployment of the spoilers, resulting in a undershoot and hard landing.
Factual narrative
On July 17, 1998, approximately 1300 mountain daylight time, a Schweizer SGU 2-22E, N9920J, was substantially damaged when it landed hard at Freemont County Airport, Canon City, Colorado. The private pilot sustained a serious injury, but his passenger was not injured. The aircraft was being operated as a personal flight under Title 14 CFR Part 91. Visual meteorological conditions prevailed, and no flight plan had been filed. The flight originated approximately 4 minutes before the accident. According to the pilot's accident report, the glider was launched by a ground vehicle using a 1,200 foot rope. After achieving an altitude of 850 feet agl, he disconnected the tow rope and turned into the traffic pattern for landing. While on a left downwind leg for runway 11 at an altitude of 650 feet, he demonstrated a stall to his passenger, resulting in a loss of 75 feet. He then noticed a 500 foot per minute sink rate had developed, and decided to cut short the downwind and base legs. The sink rate continued to increase and he lowered the nose to maintain a safe airspeed. Although the glider was low on final approach, airspeed was more than 50 mph. When he deployed the spoilers, the glider struck the ground. He thought the glider had landed short and the main landing gear had struck the runway lip. The pilot sustained a compression fracture of a lumbar vertebra (L-1), and lost consciousness momentarily. The passenger corroborated the pilot's statement, but said he saw the airspeed drop below 45 knots as the glider was flared for landing. There were five other witnesses who gave similar accounts, corroborating the pilot's statement. Postaccident examination revealed that the landing gear axle and structure were bent, and one rudder cable was separated. The glider was launched by a ground vehicle. After achieving an altitude of 850 feet agl, the pilot disconnected the tow rope and turned into the traffic pattern for landing. While on a left downwind leg at an altitude of 650 feet, he demonstrated a stall to his passenger, losing approximately 75 feet. A 500 foot per minute sink rate developed, and the pilot decided to cut short the downwind and base legs. The sink rate continued to increase and he lowered the nose to maintain a safe airspeed. When he deployed the spoilers, the glider landed short and the main landing gear struck the runway lip. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1998_FTW98LA323.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- Embry-Riddle Scholarly Commons 2021 · Journal article (JAAER) Analysis on the Negative Emotional, Physiological, and Cognitive Responses Elicited from of the Activation of a Stall Alarm
Failing to identify an aerodynamic stall can lead to the inability of an aircraft to sustain flight. To warn pilots of an impending or fully-developed stall, many aircraft have safety devices installe…