LAX02LA025
2001-11-10 · NOGALES, Arizona, United States · Serious · 1 aircraft · Status: Completed
Airport OLS
Aircraft involved
Probable cause & findings
The pilot failed to maintain directional control while landing in a cross wind. He attempted a go-around, but inadvertently stalled the airplane, which resulted in an uncontrolled descent and collision with the runway.
Factual narrative
On November 10, 2001, about 1140 mountain standard time, a Cessna 150L, N10680, collided with the runway during an attempted go-around at Nogales, Arizona. Alpha Air, Inc., was operating the rental airplane under the provisions of 14 CFR Part 91. The private pilot sustained serious injuries and one passenger sustained minor injuries; the airplane sustained substantial damage. The personal cross-country flight departed Ryan Field, Tucson, Arizona, about 1000. Visual meteorological conditions prevailed, and no flight plan had been filed. The pilot submitted a written statement. He reported that he crossed the airport at midfield while maintaining a heading of 160 degrees to enter the left down wind for runway 21. He recalled that the winds were from 120 degrees at 9 knots. While on downwind, he was aware that the wind was pushing him toward the runway and he had to correct more than he expected to stay parallel to the runway. As he turned to the base leg, he reduced power and selected 20 degrees of flaps. The wind continued to push him toward the runway, so he made a continuous turn to final. Once established on final, he lowered the flaps to 40 degrees, maintained 65 mph, and crabbed into the wind. The pilot said the approach was stable and he was maintaining centerline until he flared. He felt he must have taken some of his correction out, because just prior to touchdown the airplane moved to the right side of the runway. The left main landing gear touched down near the edge of the runway. He felt that if he continued the landing attempt, the right main and nose landing gear would be off the runway in dirt, and he would be in position to collide with the lights along the runway. He elected to attempt a go-around. The pilot said he added full power and the nose of the airplane pitched up. A witness told him that the airplane bounced about 40 feet back into the air. The pilot said the airplane stalled, turned to the left, and struck the ground in a nose down, left wing low attitude near midfield. Both wings and the fuselage sustained substantial damage. The airplane collided with the runway during an attempted go-around. The wind was from 120 degrees at 9 knots. While on downwind, the pilot was aware that the wind was pushing him toward the runway and he had to correct more than he expected to stay parallel to the runway. Once established on final, he lowered the flaps to 40 degrees, maintained 65 mph, and crabbed into the wind. The approach was stable until the pilot flared. He felt he must have taken some of his correction out, because just prior to touch down the airplane moved to the right side of the runway. The left main landing gear touched down near the edge of the runway. The pilot felt that if he continued the landing attempt, the right main and nose landing gear would be off the runway in dirt, and he would be in position to collide with the lights along the runway. He elected to attempt a go-around. He added full power and the nose of the airplane pitched up, and the airplane bounced about 40 feet back into the air. The airplane stalled, turned to the left, and struck the ground in a nose down, left wing low attitude near midfield. Both wings and the fuselage sustained substantial damage. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2001_LAX02LA025.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall, go-around). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- NASA NTRS 2025 · Conference Paper A Training Study to Improve Monitoring During A Go-Around
As part of an FAA program to improve go-around (GA) safety, we were asked to determine if we could improve the performance of the Pilot Monitoring (PM) during a GA maneuver.
- Flight Safety Foundation 2024 · FSF / AeroSafety World Go-Around Safety Forum Findings
Foundation Go-Around Safety Forum technical findings — examines why pilots fail to execute go-arounds when criteria are met (stabilized approach gate not met, energy state out of envelope, traffic con…
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…