Skip to content

Atlas / NTSB / LAX03LA153

NTSB CAROL · Event

Event LAX03LA153

2003-05-18 CHANDLER, Arizona, United States Airport · CHD None 1 aircraft Status: Completed

Registry · N24006

FAA Aircraft Registry record.

Make / Model

BEECH B19

Year of manufacture

1977 · 26 years old at event

Engine

LYCOMING 0-320 SERIES (180 hp)

Seats / Engines

4 seats · 1 engine

Last airworthiness date

19770208

ADS-B equipped

Yes — Mode-S A23276

Registrant of record

KEIPER MARK D

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

the pilot's failure to maintain directional control on the landing roll due to his inadvertent use of brakes.

Factual narrative

On May 18, 2003, about 0700 mountain standard time, a Beech B19, N24006, collided with a taxiway sign while on the landing roll at Chandler Municipal Airport (CHD), Chandler, Arizona. The co-owner/pilot was operating the airplane under the provisions of 14 CFR Part 91. The commercial pilot, the sole occupant, was not injured; the airplane sustained substantial damage. The personal local flight departed CHD at an undetermined time. Day visual meteorological conditions prevailed, and a flight plan had not been filed. In a written statement, the pilot reported that he was performing practice touch-and-go takeoffs and landings on runway 04L. During the landing roll, the airplane drifted to the left of the centerline. The pilot applied right rudder pressure in an effort to counteract the drift. The airplane veered sharply to the right, and he applied left rudder pressure to correct. After repeating this sequence, the airplane departed the left side of the runway, and the right wing collided with a taxiway sign. The airplane sustained substantial damage to the right wing. During his attempted corrections, the pilot thought that he might have inadvertently applied pressure to the toe brakes, located on the top end of the rudder pedals, rather than the bottom end of the rudder pedals. The pilot did not report any mechanical problems with the airplane prior to the accident. The airplane collided with a taxiway sign following a loss of directional control while on the landing roll. During the landing roll, the airplane drifted to the left of the centerline. The pilot applied right rudder pressure in an effort to counteract the drift, and the airplane veered sharply to the right. He applied left rudder pressure to correct for the overcompensation, and the airplane veered sharply to the left. After repeating this sequence, the airplane departed the left side of the runway, and the right wing collided with a taxiway sign. The pilot thought that he might have inadvertently applied pressure to the toe brakes during his attempted corrections, rather than the rudder pedals. The pilot did not report any mechanical problems with the airplane prior to the accident. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2003_LAX03LA153.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.