LAX05CA304
2005-09-15 · Porterville, California, United States · None · 1 aircraft · Status: Completed
Airport PTV
Current FAA registration · N127F
- Make / Model
- BEECH 95-B55 (T42A)
- Year of manufacture
- 1965 · 40 years old at event
- Engine
- CONT MOTOR I0-470 SERIES (260 hp)
- Seats / Engines
- 6 seats · 2 engines
- Last airworthiness date
- 19650302
- ADS-B equipped
- Yes — Mode-S A06E30
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
the pilot's failure to extend the landing gear prior to landing.
Factual narrative
On September 15, 2005, at 1100 Pacific daylight time, a Beech 95-B55 (Baron), N127F, landed with the gear retracted at Porterville Municipal Airport, Porterville, California. The airplane was registered to a private company and was being operated by the pilot under the provisions of 14 CFR Part 91. The private pilot, the sole occupant, was not injured; the airplane sustained substantial damage to ribs in the fuselage belly. The pilot departed from Big Piney - Marbleton Airport, Big Piney, Wyoming, at 0700, and was landing at his destination when the accident occurred. Visual meteorological conditions prevailed and a visual flight rules (VFR) flight plan had been filed. According to the pilot, he entered the landing pattern for runway 12, which was the active runway in use. After the pilot was established in the pattern, the wind changed and an airplane departed runway 30. The pilot decided to change his landing pattern for runway 30 and crossed midfield where he entered the downwind leg of the traffic pattern for runway 30. Upon entering the downwind leg of the traffic pattern for runway 30, the pilot retracted the landing gear to decrease the required engine performance for the airplane. The pilot turned base and then final while extending the flaps and failed to lower the landing gear. He stated that he landed the airplane with the landing gear in the retracted position. No mechanical anomalies were reported. The pilot failed to extend the landing gear prior to landing and ribs were damaged in the belly section of the airplane. He initially entered the landing pattern for runway 12, which was the active runway in use. After the pilot was established in the pattern, the wind changed and an airplane departed runway 30. The pilot decided to change his landing pattern and crossed midfield where he entered the downwind leg of the traffic pattern for runway 30. Upon entering the downwind leg of the traffic pattern for runway 30, the pilot retracted the landing gear to decrease the required engine performance for the airplane. The pilot turned base and then final while extending the flaps and failed to lower the landing gear prior to landing on the runway. No mechanical anomalies were reported. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2005_LAX05CA304.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗