LAX07CA207
2007-07-07 · Spanaway, Washington, United States · Minor · 1 aircraft · Status: Completed
Airport 3B8
Aircraft involved
Probable cause & findings
The pilot's failure to maintain directional control during an aborted takeoff from a short and narrow runway.
Factual narrative
On July 7, 2007, about 1004 Pacific daylight time, a Cessna 170, N9716A, owned and operated by the pilot, nosed over after veering off runway 34 at the Shady Acres Airport, Spanaway, Washington. The airplane was substantially damaged. The private pilot and one of the two passengers received minor injuries. The second passenger was not injured. Visual meteorological conditions prevailed at the time of the personal flight, and no flight plan had been filed. The flight was performed under the provisions of 14 CFR Part 91, and it was originating at the time of the accident. The pilot reported to the National Transportation Safety Board investigator that nothing unusual was observed with his airplane during the preflight inspection. All systems appeared to be functioning normally during the engine run up. The pilot stated that he set the trim for takeoff, proceeded onto runway 34, added full engine power, and the airplane accelerated normally. When the airplane was about 1/3 of the way down the runway at the location where he expected to lift off the ground, the airplane was still on the runway. Therefore, he aborted the takeoff. The pilot stated that he retarded the throttle, applied brakes, and lost directional control of the airplane. The pilot additionally informed the Safety Board investigator that he erred by not maintaining directional control of his conventional gear airplane while decelerating. The airplane veered off the left side of the runway and entered a grassy area. The airport's runway is 1,800 feet long and 20 feet wide. The airplane veered off the runway and nosed over in grassy terrain during an aborted takeoff. The pilot did not observe anything unusual with his airplane during his preflight inspection, and all systems appeared to be functioning normally during the engine run up. The pilot stated that he set the trim for takeoff, proceeded onto runway 34, added full engine power, and the airplane accelerated normally. When the airplane was about 1/3 of the way down the runway at the location where he expected to lift off the ground, the airplane was still on the runway. Therefore, he aborted the takeoff. The pilot said he retarded the throttle, applied brakes, and lost directional control of the airplane. The airport's runway is 1,800 feet long and 20 feet wide. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2007_LAX07CA207.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type. All research papers
- Semantic Scholar 2021 · Article (BMC Neurology) Home-based light therapy for fatigue following acquired brain injury: a pilot randomized controlled trial
Background and objectives Fatigue and sleep disturbance are debilitating problems following brain injury and there are no established treatments.
- NASA NTRS 2019 · Abstract Wetting Angle and Surface Tension of Germanium Melts on Different Substrate Materials
The sessile drop technique has been used to measure the wetting angle and the surface tension of molten germanium (Ge) on various substrate materials.
- NASA NTRS 2019 · Abstract Determination of the Wetting Angle of Germanium and Germanium-Silicon Melts on Different Substrate Materials
During Bridgman growth of semiconductors detachment of the crystal and the melt meniscus has occasionally been observed, mainly under microgravity (microg) conditions.
- NASA NTRS 2019 · Abstract Contact Angles and Surface Tension of Germanium-Silicon Melts
Precise knowledge of material parameters is more and more important for improving crystal growth processes. Two important parameters are the contact (wetting) angle and the surface tension, determinin…
- arXiv 2019 · arXiv preprint Heat and water vapor transfer in the wake of a falling ice sphere and its implication for secondary ice formation in clouds
We perform direct numerical simulations of the settling of an ice sphere in an ambient fluid accounting for heat and mass transfer with the aim of studying in a meteorological context the case of fall…