Skip to content

Atlas / NTSB / LAX95LA152

NTSB CAROL · Event

Event LAX95LA152

1995-04-01 LONG BEACH, California, United States Airport · LGB None 1 aircraft Status: Completed

Registry · N111LS

FAA Aircraft Registry record.

Make / Model

AMERICAN CHAMPION AIRCRAFT 8KCAB

Year of manufacture

1995 · 0 years old at event

Engine

LYCOMING AEIO-360 SER (180 hp)

Seats / Engines

1 seats · 1 engine

Last airworthiness date

19950106

ADS-B equipped

Yes — Mode-S A030F5

Registrant of record

GRANT WILLIAM S

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

the failure and collapse of the left main landing gear due to a defective and improper weld by the manufacturer.

Factual narrative

On April 1, 1995, at 1450 Pacific standard time, an American Champion 8KCAB, N111LS, sustained substantial damage while making a wheel landing at Long Beach, California. The aircraft was operated by Hart Air Squadron Jg 54 and was on a local flight. Visual meteorological conditions were prevalent at the time and no flight plan had been filed. Neither the certificated private pilot nor his passenger were injured. The flight originated from the Long Beach airport at 1400 on the day of the accident. The pilot reported that he had been cleared to land on runway 25R and was prepared to execute a wheel landing. After initially touching down at 85 mph, he felt the aircraft bounce slightly then drift right of the runway centerline. He recovered from the bounce and realigned the aircraft with the runway. When he again touched down, he lowered his left wing slightly to compensate for the left crosswind. During rollout, the pilot noticed that the aircraft began to list excessively toward its left side. He attempted to correct the condition by applying right aileron, but lost control effectiveness as the aircraft slowed. The aircraft continued to list until the left wing contacted the runway. As the left gear collapsed, the aircraft veered right, coming to a stop near midfield and off the right side of the runway. The postaccident inspection of the aircraft revealed that the left main landing gear attachment bracket of the aircraft had separated in the area of the weld. The separated weld section was sent to the National Transportation Safety Board Materials Laboratory Division for inspection. A stereo microscope examination of the fractures revealed a lack of weld fusion. The aircraft was manufactured in January of 1995 and had accrued 71 total hours of operation. THE PILOT REPORTED THAT AFTER TOUCHING DOWN HE FELT THE AIRCRAFT BOUNCE SLIGHTLY. HE RECOVERED FROM THE BOUNCE AND CONTINUED THE LANDING. DURING ROLLOUT, THE PILOT NOTED THAT THE AIRCRAFT BEGAN TO LIST EXCESSIVELY TOWARD ITS LEFT SIDE. IN SPITE OF HIS CONTROL INPUTS, THE AIRCRAFT CONTINUED TO LIST UNTIL THE LEFT WING FINALLY CONTACTED THE RUNWAY. AN INSPECTION OF THE AIRCRAFT REVEALED THAT THE LEFT MAIN LANDING GEAR ATTACHMENT BRACKET HAD SEPARATED IN THE AREA OF THE WELD. A STEREO MICROSCOPE EXAMINATION OF THE FRACTURE SURFACES REVEALED A LACK OF WELD FUSION. THE AIRCRAFT WAS MANUFACTURED IN JANUARY 1995 AND HAD ACCRUED A TOTAL OF 71.9 HOURS FLIGHT TIME WITH NO REPORTED PRIOR DAMAGE. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_1995_LAX95LA152.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.