Skip to content

MIA00LA034

1999-11-30 · JACKSONVILLE, Florida, United States · None · 1 aircraft · Status: Completed

Airport JAX

Current FAA registration · N1818R

Make / Model
CESSNA R182
Year of manufacture
1978 · 21 years old at event
Engine
LYCOMING 0-540 SERIES (250 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19780829
ADS-B equipped
Yes — Mode-S A147E3

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The pilot's failure to complete the before landing checklist and extend the landing gear, resulting in a gear up landing. A factor in the accident is the failure of the landing gear warning circuit to activate the cockpit warning horn.

Factual narrative

On November 30, 1999, about 1205 eastern standard time, a Cessna 182RG, N1818R, registered to a private individual, operating as a Title 14 CFR Part 91 personal flight, made a gear-up landing at Jacksonville International Airport, Jacksonville, Florida. Visual meteorological conditions prevailed and no flight plan was filed. The airplane received substantial damage and the private-rated pilot, the sole occupant, was not injured. The flight originated from the same airport about 15 minutes before the accident. According to the pilot, he intended to fly the airplane around the landing traffic pattern to warm the crankcase oil in preparation for an oil change and annual inspection, and forgot to lower the landing gear for landing. A postaccident check of the airplane revealed the main landing gear bulkheads were minimally ground down by the slide on the concrete runway, and the gear unsafe warning horn circuit was inoperative, although the gear up amber position lights operated normally. According to an FAA inspector, the pilot stated to him that he failed to extend the landing gear. The inspector confirmed that the dual warning horn assembly, (stall and gear-up with throttle at idle) was found to be inoperative, postaccident. The pilot stated that he intended to fly one circuit around the landing pattern to warm the engine oil in preparation for an annual inspection of his Cessna 182RG, and forgot to extend the landing gear before landing. The main landing gear bulkheads were minimally ground down during the slide on the concrete runway. Postcrash check of the landing gear warning system revealed the electrical warning module was inoperative. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_1999_MIA00LA034.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

Matched on aircraft type or causal vocabulary (stall). All research papers