SEA05LA006
2004-10-14 · Hermiston, Oregon, United States · Fatal · 1 aircraft · Status: Completed
Airport KHRI
N706C has since been reassigned. It is now registered to a different aircraft (CUB CRAFTERS INC CC18-180, built 2009), which was not involved in this event.
Aircraft involved
Probable cause & findings
The pilot's failure to maintain an airspeed above stall speed while executing a wingover maneuver at the top of a vertical climb, leading to an inadvertent spin, and the pilot's inadequate remedial action in attempting to recover from the spin. Factors include performing aerobatic maneuvers close to the terrain.
Factual narrative
On October 14, 2004, approximately 0900 Pacific daylight time, an experimental Caldwell Glasair II, N706C, impacted the terrain while the pilot was performing low-level aerobatic maneuvers about one-half mile southwest of Hermiston Municipal Airport, Hermiston, Oregon. The private pilot, who was the sole occupant, received fatal injuries, and the aircraft, which was owned and operated by the pilot, was destroyed by the impact and post-crash fire. The 14 CFR Part 91 personal pleasure flight, which departed Hermiston about 15 minutes before the crash, was being operated in visual meteorological conditions. No flight plan had been filed. There was no report of an ELT activation. According to witnesses, the pilot, who had been performing low-level aerobatic maneuvers to the east of the airport, made a low-level pass over the runway from east to west. The aircraft then pulled up rapidly and climbed on a near-vertical line. As the aircraft reached the top of its climb, its forward speed appeared to became very slow, and then it was witnessed doing a "wingover-like" maneuver to the left. As it completed the wingover maneuver, it appeared to enter a spin. The aircraft spun two or three times to the left, and then according to the witnesses, its rotation rate decreased. The witnesses reported that at the point where the rotation seemed to decrease, the nose of the aircraft started to rise, "as if the pilot was attempting to pull out of the dive." But soon after the rotation decreased and the nose started to rise, the aircraft impacted the terrain and immediately burst into flames. All witnesses noted that the aircraft's aerobatic smoke system was producing a significant amount of smoke as it climbed, but there was disagreement as to the amount it produced on the way down. Some said that no smoke was produced on the way down, but others said that once the rotation rate slowed and the nose started to rise, that the smoke started being produced again. There was also some disagreement about whether the engine was producing power during the entire sequence. All witnesses said that the engine sounded as if it were at full power on the way up, but some thought that it was not producing much power on the way down. A number of witnesses stated that it appeared to them that the pilot may have pulled the power to idle after the wingover, and then about half way down, the engine went back to full power and the aerobatic smoke started being produced again. According to the FAA Inspector who evaluated the aircraft wreckage at the scene, there was no evidence of any engine malfunction, or any indication that there had been a problem with the flight control system. A toxicology examination was negative for all tested substances, and the autopsy identified the cause of death as accidental as the result of blunt impact forces. After performing a number of low-level aerobatic maneuvers to the east of the airport, the pilot made a low-level pass over the runway from east to west. He then executed a rapid pull-up, and climbed on a near-vertical line. As the aircraft climbed, its airspeed decreased to the point that when the pilot executed a wingover maneuver at the top of the climb, the aircraft entered a spin. It then spun two or three times to the left, before its rotation rate began to decrease. As the rotation rate decreased, the pilot attempted to pull out of the dive, but the aircraft impacted the terrain and immediately burst into flames. There was no indication of any problems with the flight controls, nor any evidence that there had been a malfunction associated with the engine. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2004_SEA05LA006.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (stall). All research papers
- NASA NTRS 2026 · Conference Paper Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- arXiv 2023 · arXiv preprint Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…
- arXiv 2022 · arXiv preprint Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- Embry-Riddle Scholarly Commons 2021 · Journal article (JAAER) Analysis on the Negative Emotional, Physiological, and Cognitive Responses Elicited from of the Activation of a Stall Alarm
Failing to identify an aerodynamic stall can lead to the inability of an aircraft to sustain flight. To warn pilots of an impending or fully-developed stall, many aircraft have safety devices installe…