WPR10CA402

Factual narrative

The pilot said he was too high on his landing approach, the airplane touched down further down the runway than he had planned, and he was not able to stop the airplane prior to it hitting the cinder block wall at the end of the runway. He reported that the winds were light and variable. The pilot further stated that there were no mechanical anomalies with the airplane. The length of the accident runway is 3,322 feet. The NTSB investigator-in-charge observed skid marks that started at 189 yards from the wall and that changed to continuous skid marks 117 yards from the wall. The pilot stated that the airplane was too high while on the landing approach. The airplane touched down further down the runway than he had planned. He was not able to stop the airplane prior to it hitting the cinder block wall at the end of the runway. He reported that the wind was light and variable. The pilot further stated that there were no mechanical anomalies with the airplane. The length of the accident runway is 3,322 feet. A Safety Board investigator observed skid marks that started at 567 feet from the wall and that changed to continuous skid marks 351 feet from the wall. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

NTSB Findings

FAA avdata. C = Cause, F = Factor.

• C Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent/approach/glide path-Not attained/maintained - C
• — Environmental issues-Physical environment-Object/animal/substance-Wall/barricade-Contributed to outcome
• C Personnel issues-Action/decision-Action-Incorrect action performance-Pilot - C