Skip to content

Atlas / STC / SA3961WE

FAA · Supplemental Type Certificate

STC SA3961WE

Installation of extended engine mount, revised cowling and induction system, Hamilton Standard 22D40 or 12D40 constant speed propeller, and modified elevator trim tab system in accordance with Serv-Aero Engineering, Inc. FAA sealed Master Drawing List MDL5379, dated May 3, 1979, or later FAA approved revision. Pratt and Whitney R1340-AN-1 engine previously installed per Type Certificate A4SW is required with this installation. (Restricted Category)

Current Reissued Aircraft Single-Engine Rev 07/30/2003 View PDF on drs.faa.gov ↗

What is an STC?

A Supplemental Type Certificate authorizes a major modification or alteration to an FAA-certificated aircraft. STCs are how operators legally install new avionics, change fuel systems, add floats, swap engines, etc. — every change beyond a minor modification needs one.

Applicable aircraft (1)

Certification basis — 14 CFR

Specific sections

  • Sec. 111
  • Sec. 113
  • Sec. 115
  • Sec. 117
  • Sec. 119
  • Sec. 120

The STC PDF on drs.faa.gov is the authoritative document — it lists installation instructions, ICA requirements, and any limitations. Open PDF ↗