AD 2025-17781
Published 2025-09-15 · 5 models · 94 US-registered tails affected · Federal Register
Airworthiness Directives; The Boeing Company Airplanes Federal Register ↗
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2024-19-14, which applies to certain The Boeing Company Model 777-200, 777-200LR, 777-300, 777-300ER, and 777F series airplanes. AD 2024-19-14 requires repetitive inspections and bond resistance measurement of the bonding jumpers on the first fuel feed tube installed immediately forward of the wing front spar at the left and right main fuel tank penetrations, and applicable corrective actions. Since the FAA issued AD 2024-19-14, the FAA determined that additional inspections are required to address the unsafe condition. This proposed AD would require repetitive detailed inspections (DET), repetitive bond resistance measurement, and applicable on-condition actions. This proposed AD would also expand the applicability and require revising the existing maintenance or inspection program, as applicable, to incorporate a certain airworthiness limitation. The FAA is proposing this AD to address the unsafe condition on these products.
Applicability · by US fleet size
- BOEING 777F TCDS T00001SE 43 tails
- BOEING 777-300ER TCDS T00001SE 24 tails
- BOEING 75 TCDS A-743 18 tails
- BOEING 777-200 TCDS T00001SE 8 tails
- H&S AVIATION LIGHTNING 1 tails
Federal Register text
Verbatim; the Federal Register publication is the legally binding document. Cite: 90 FR 44340. View on Federal Register ↗
[Federal Register Volume 90, Number 176 (Monday, September 15, 2025)] [Proposed Rules] [Pages 44340-44347] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: 2025-17781]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2025-2546; Project Identifier AD-2025-01060-T] RIN 2120-AA64
Airworthiness Directives; The Boeing Company Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 2024-19-14, which applies to certain The Boeing Company Model 777-200, 777-200LR, 777-300, 777-300ER, and 777F series airplanes. AD 2024-19-14 requires repetitive inspections and bond resistance measurement of the bonding jumpers on the first fuel feed tube installed immediately forward of the wing front spar at the left and right main fuel tank penetrations, and applicable corrective actions. Since the FAA issued AD 2024-19-14, the FAA determined that additional inspections are required to address the unsafe condition. This proposed AD would require repetitive detailed inspections (DET), repetitive bond resistance measurement, and applicable on-condition actions. This proposed AD would also expand the applicability and require revising the existing maintenance or inspection program, as applicable, to incorporate a certain airworthiness limitation. The FAA is proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by October 30, 2025.
ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. Fax: 202-493-2251. Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2025-2546; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: For Boeing material identified in this proposed AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; telephone 562-797-1717; website myboeingfleet.com. You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available at regulations.gov under Docket No. FAA-2025-2546.
FOR FURTHER INFORMATION CONTACT: Samuel Dorsey, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206- 231-3415; email: [email protected].