NTSB CAROL · Event
Event ANC05IA020
Registry · N858FT
FAA Aircraft Registry record.
Make / Model
BOEING 747-123
Year of manufacture
1970 · 34 years old at event
Engine
P & W JT9D-3A
Seats / Engines
495 seats · 4 engines
Last airworthiness date
19701211
ADS-B equipped
Yes — Mode-S ABC59F
Registrant of record
LOGISTIC AIR INC
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The failure of a high-pressure fuel line fitting, which resulted in an engine fire during takeoff/initial climb.
Factual narrative
HISTORY OF FLIGHT
On December 29, 2004, about 1741 Alaska standard time, a Boeing 747-123 airplane, N858FT, sustained minor damage resulting from an under-cowl fire in the number four engine during initial climb after takeoff from the Ted Stevens International Airport, Anchorage, Alaska. The airplane was being operated as Flight 8445, by Polar Air Cargo of Purchase, New York, as an instrument flight rules (IFR) non-scheduled international cargo flight under Title 14, CFR Part 121, when the incident occurred. The three flight crew members were not injured. Visual meteorological conditions prevailed, and an instrument flight plan was filed. The flight originated at the Ted Stevens International Airport, Anchorage, about 1735, and was bound for the Osan Air Base, Republic of South Korea. During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on December 29, the FAA aviation safety inspector who examined the airplane said there was a fire in the number four engine compartment, and that the entire outboard cowl was missing. He said the crew reported a fire alarm indication in the engine during initial climb, and that they reported shutting down the engine and activating the fire extinguishing system. The airplane dumped fuel, returned to Anchorage, and landed without incident. During an examination of the airplane by the IIC on December 30, the entire outboard cowl was missing. The inboard cowl had been removed by the maintenance crew. The inside of the inboard cowl had extensive fire damage. The engine also had extensive fire damage, with the most damage in the area of the fuel controller. The number four engine was removed from the airplane and taken to a storage warehouse. During a visual inspection of the outboard section of the engine adjacent to the oil cooler, the IIC noticed a misaligned large diameter fuel tube (PW Part No. 772123). The fuel tube had separated from the coupler attaching it to the oil cooler, leaving a gap of about one-half inch. The oil cooler is co-mingled with the fuel flow transducer, and uses the heat-exchange principle to cool engine oil, exchanging heat with high quantity fuel flow. The fuel tube is about one and one-quarter inches in diameter, and has a working pressure of about 200 pounds per square inch. The connection at the oil cooler end of the tube assembly included a ferrule that had been brazed to the fuel tube about one inch from the end of the tube. An elastomeric seal (O-ring) was placed around the tube adjacent to the lip of the ferrule, and both were held in place by a nut that was threaded to an externally threaded fitting. Two safety wires were attached to the nut, one wire from the nut to the fitting, and the second from the nut to a metal tab welded onto the fuel pipe. The wire from the nut to the metal tab was broken at the tab. Separation of the fuel tube assembly connection occurred at the brazed sleeve joint between the ferrule and the fuel tube. The fuel tube was removed from the engine without disturbing the ferrule retaining nut, which was safety-wired to the fitting. The tube assembly was shipped to the NTSB Materials Laboratory in Washington, D. C.
AIRCRAFT INFORMATION
The accident airplane is a Boeing 747-123 (cargo configuration), serial number 20109. At the time of the incident, the number four engine had logged 75,863 service hours, with 2,183 service hours since overhaul.
TEST AND RESEARCH
A detailed examination of the tube assembly was conducted, and revealed that the torque on the retaining nut was so low that, once the safety was removed, the nut was easily removed by hand. The safety wire, attached from the nut to the metal tab, had failed in a typical overstress mode. The ferrule had been brazed to the tube at a distance from the end of the tube significantly greater than that specified by the manufacturer. Visual inspection revealed that the brazing filler material adhered to the tube better than it did to the ferrule. X-ray mapping of both brazed surfaces confirmed that the filler mater adhered more readily to the tube than to the ferrule. Aerospace Material Specification (AMS) 2664F for silver brazing requires eighty percent of the mating surfaces of a joint be joined by filler metal. X-ray mapping suggested that an estimated fifty percent of the ferrule surface, and sixty percent of the tube surface, had been covered by filler material before separation.
ADDITIONAL INFORMATION
The Pratt & Whitney JT9D-7A engine is a discontinued model, and according to the manufacturer, there are about 220 of this model engine still in service worldwide. The fuel pipe in question is no longer in production, and is not used on any other engine model. The 14 CFR Part 121 international cargo flight had an under-cowl fire in the number four engine during takeoff. The crew shut down the engine, activated the fire extinguishing system, and returned to the airport. An inspection of the engine disclosed that the entire outboard engine cowl was missing, and the engine had extensive fire damage. A fuel tube to the oil cooler was observed to have separated from the coupler attaching it to the oil cooler, leaving a gap of about one-half inch. The oil cooler uses the heat-exchange principle, exchanging heat via high quantity fuel flow. The fuel tube is about one and one-quarter inches in diameter, and has a working pressure of about 200 psi. Separation of the fuel tube assembly connection occurred at the brazed sleeve joint between the ferrule and the fuel tube. An examination and X-ray mapping revealed that the brazed joint did not meet the minimum requirement for filler material adhesion required in Aerospace Material Specification (AMS) 2664F for silver brazing. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2004_ANC05IA020.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type or causal vocabulary (maintenance). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA)
From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- Semantic Scholar 2025 · Article (Applied Sciences)
Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
- Embry-Riddle Scholarly Commons 2024 · Journal article (IJAAA)
Just Culture in Aviation: A Metaphorical Study on Aircraft Maintenance Students
Just Culture, a sub-dimension of safety culture, has been a prominent and debated topic in aviation safety in recent years.
- Embry-Riddle Scholarly Commons 2024 · Journal article (IJAAA)
Performance PRISM: A Comprehensive Framework For Performance Measurement In Aircraft Maintenance
Aircraft maintenance is governed by rigorous safety requirements and high operational complexity, demanding robust performance measurement frameworks to ensure optimal maintenance practices.
Browse the full corpus — academia portal ↗