NTSB LAX89FA314 — 1989-09-15 · ONTARIO, California, United States

N70PE has since been reassigned. It is now registered to a different aircraft (MITSUBISHI MU-2B-40, built 1979), which was not involved in this event.

Aircraft involved

N70PE Piper PA-31-350 Fatal

Probable cause & findings

FAILURE OF THE RIGHT PROPELLER HUB DUE TO METAL FATIGUE WHICH RESULTED IN CATASTROPHIC SEPARATION OF THE PROPELLER. CONTRIBUTING TO THE ACCIDENT WAS DAMAGE DONE TO THE AIRCRAFT AIRFRAME IN FLIGHT BY THE SEPARATING PROPELLER MAKING THE AIRCRAFT UNCONTROLLABLE.

Factual narrative

THE PROPELLER SEPARATED FROM THE RIGHT ENGINE DURING THE INITIAL CLIMB. EXAMINATION OF THE WRECKAGE REVEALED THE PROPELLER HUB FRACTURE RESULTED IN ONE OF THE THREE PROPELLER BLADES DETACHING FROM THE HUB. THE REST OF THE PROPELLER HUB THEN SEPARATED STRIKING THE RIGHT FRONT OF THE FUSELAGE. OIL WAS SPREAD ACROSS THE AIRCRAFT NOSE AND WINDSHEILD. THE FUSELAGE RIGHT SIDE DAMAGE INCREASED AERODYNAMIC DRAG. WITNESSES REPORTED THE ENGINE COWLING WAS TORN. THE AIRCRAFT ENTERED A RIGHT TURN AND DIVE. IT IMPACTED THE GROUND IN A NEAR INVERTED ATTITUDE. METALLURGICAL EXAMINATION OF THE FAILED PROP HUB REVEALED METAL FATIGUE EMANATING FROM THE THREADED HOLE FOR THE GREASE FITTING. THE THREADS HAD BEEN DEFORMED BY SHOT PEENING, RESULTING IN INCREASED STRESS CONCENTRATIONS AT THE THREADS. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_1989_LAX89FA314.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Search this event elsewhere

External sources are reported, not agency: signal that something happened, not fact about what happened.