Nonlinear Model Predictive Control via Sequential Convex Programming for Drone-to-Drone Docking

Abstract

Verbatim from arXiv. Not paraphrased, not summarized.

Autonomous mid-air docking of multi-rotor vehicles under disturbance-driven target motion poses a constrained non-linear trajectory optimization challenge. This work formulates the docking task as a finite-horizon optimal control problem based on a reduced-order nonlinear model augmented with disturbance states. The resulting problem is solved using sequential convex programming within a receding-horizon framework to generate dynamically feasible docking trajectories. State estimation with noisy measurements is incorporated to enable robust relative motion prediction, while trajectory execution is validated in a high-fidelity rigid-body MuJoCo simulation environment. The proposed framework is evaluated for stationary and constant-velocity target motions, demonstrating reliable convergence to the docking interface while satisfying geometric capture constraints. Quantitatively, the method maintains negligible docking-cone violations and terminal state errors within prescribed tolerances, and achieves consistent, safe docking performance for cone half-angles as low as 10 degrees. Robust operation is observed for wind disturbance levels up to a standard deviation of 0.5, while preserving bounded approach velocities and stable control effort. These results demonstrate the effectiveness of the SCP-based trajectory optimization framework for disturbance-robust aerial docking under estimation uncertainty.

Authors

• Neeraj Balachandar
• Shriram Hari
• Vishnu R. Unni

Keywords

• cs.RO