CEN16WA075
2015-11-16 · Zihuatanejo, Mexico · None · 1 aircraft · Status: N/A
Aircraft involved
Factual narrative
The Direccion General de Aeronutica Civil (DGAC) of Mexico has notified the NTSB of an fatal accident involving a LearJet 60, XA-UQP, that occurred on November 16, 2015. The NTSB has appointed a U.S. Accredited Representative to assist the DGAC under the provisions of ICAO Annex 13. The investigation is under the jurisdiction of the Government of Mexico. This report is for information purposes only and contains only information released by the Government of Mexico. Further information pertaining to this accident may be obtained from: Secretaria de Comunicaciones y Transportes (SCT) Direccion General de Aeronutica Civil (DGAC) Col Narvarte, Del. Benito Juárez Mexico, D.F, Mexico c.p. 15620 Tel: (55)57239300 Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2015_CEN16WA075.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type. All research papers
- NASA NTRS 2024 · Conference Paper Al6061-RAM2 Development and Hot-Fire Testing using Additive Manufacturing Laser Powder Directed Energy Deposition for Liquid Rocket Engine Channel-Cooled Nozzles
Aluminum 6061-RAM2 is a high-strength aluminum feedstock developed for additive manufacturing (AM)processes. This alloy leverages Reactive Additive Manufacturing (RAM) technology.
- NASA NTRS 2024 · Presentation Al6061-RAM2 Development and Hot-Fire Testing using Additive Manufacturing Laser Powder Directed Energy Deposition for Liquid Rocket Engine Channel-Cooled Nozzles
Aluminum 6061-RAM2 is a high-strength aluminum feedstock developed for additive manufacturing (AM)processes. This alloy leverages Reactive Additive Manufacturing (RAM) technology.
- arXiv 2022 · arXiv preprint Zero Touch Coordinated UAV Network Formation for 360° Views of a Moving Ground Target in Remote VR Applications
Unmanned aerial vehicles (UAVs) with on-board cameras are widely used for remote surveillance and video capturing applications.
- NTSB Aircraft Accident Reports 2022 · Accident report Loss of Control on Takeoff in Icing Conditions — Citation 560XL
Cessna Citation 560XL fatal takeoff icing accident, March 2018. Investigation of a Citation 560XL loss-of-control takeoff accident in icing conditions.
- NASA NTRS 2019 · Technical Memorandum (TM) Fidelity assessment of a UH-60A simulation on the NASA Ames vertical motion simulator
Helicopter handling qualities research requires that a ground-based simulation be a high-fidelity representation of the actual helicopter, especially over the frequency range of the investigation.
- NASA NTRS 2019 · Other Differential Pressures on a Pitot-venturi and a Pitot-static Nozzle over 360 Degrees Pitch and Yaw
Measurements of the differential pressures on two navy air-speed nozzles, consisting of a Zahm type Pitot-Venturi tube and a SQ-16 two-pronged Pitot-static tube, in a tunnel air stream of fixed speed …