NTSB CAROL · Event
Event DCA21LA011
Registry · N1128M
FAA Aircraft Registry record.
Make / Model
ORLICAN S R O M-8 EAGLE
Year of manufacture
2025
Engine
ROTAX 912ULS SERIES (100 hp)
Seats / Engines
2 seats · 1 engine
Last airworthiness date
20250831
ADS-B equipped
Yes — Mode-S A0371D
Registrant of record
FLY LIGHT LLC
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The flight crew's misidentification of the landing runway, which resulted in a runway overrun and the airplane’s impact with the airport perimeter fence.
Factual narrative
HISTORY OF FLIGHTOn October 21, 2020, about 2255 central daylight time, a Learjet 60 airplane, N1128M, landed on runway 30 instead of runway 34 at Chicago Executive Airport (PWK), Wheeling, Illinois, and overran the end of the runway. The two pilots and six passengers were not injured, and the airplane sustained substantial damage. The airplane was operated as a Title 14 Code of Federal Regulations Part 135 nonscheduled air taxi flight. Night visual meteorological conditions prevailed at the time of the accident. The accident flight departed Cuyahoga County Airport, Cleveland, Ohio about 2158 (2258 eastern daylight time). For the first portion of the flight, the first officer was the pilot flying (PF), and captain was the pilot monitoring. At 2237:28, the captain called for the approach checklist and briefed the approach to PWK. The crew planned for a visual approach to runway 34; as a backup, the captain set up the instrument landing system approach frequency for runway 16 into the navigation system for a possible circle to land on runway 34. During a postaccident interview, the captain stated that, about this point in the flight, he and the first officer discussed the pre-departure landing distance assessment that used wet runway assumptions for a landing on runway 34. The assessment showed that a factored landing distance of 4,790 ft was required. At 2241:09, the flight crew exchanged flight controls, and the captain became the pilot flying as the airplane descended through 8,000 feet mean sea level when it was about 50 miles from PWK. The flight crew navigated around minor rain showers and was cleared direct to PWK at 2249:26. The crewmembers reported, during postaccident interviews, that they had trouble turning on the pilot-controlled runway lighting at PWK; two attempts to turn on the runway lights were recorded on the cockpit voice recorder (CVR) at 2250:53 and 2252:19. Between those times, at 2251:01, the first officer stated that he thought that he saw the field. and the first officer confirmed he had runway 24 in sight at 2252:39. The first officer then told the Chicago approach controller that the field was in sight, and the controller cleared the airplane for the visual approach to runway 34. About 2253:00, the airplane began to turn left toward the runway, and the first officer reported, on the common traffic advisory frequency for PWK, that the airplane was on a right base for runway 34 (as recorded by the CVR at 2253:16). The captain asked the first officer to input the Northbrook VOR frequency into the navigation system. The captain stated that he saw the runway and a set of precision approach path indicator lights on the right side of the runway and followed that guidance to the runway. The airplane touched down at 2255:20, and the captain stated that the ground spoilers extended normally, the thrust reversers were deployed “carefully” because of a crosswind, and brakes were applied immediately. At 2255:24, the first officer called 100 knots and 1,000 feet of runway remaining. The captain recognized that the airplane would not stop by the end of the runway surface and steered the airplane left to avoid a road. At 2255:45, the CVR recorded sounds indicating the airplane had left the runway surface. The airplane came to rest at the airport perimeter fence a few seconds later. The crewmembers commenced an evacuation of the airplane and was told by ground personnel afterward that they landed the airplane on runway 30 instead of runway 34. METEOROLOGICAL INFORMATIONAt 2252, the PWK automated surface observing system reported the wind from 080° at 7 knots, a visibility of 10 statute miles or greater, ceiling overcast at 4,500 ft above ground level, a temperature of 11°C and a dew point temperature of 8°C, and an altimeter setting of 30.19 inches of mercury. The remarks section indicated that, 0.01 inch of liquid equivalent precipitation had fallen since 2152. WRECKAGE AND IMPACT INFORMATIONThe airplane sustained substantial damage to the right wing. The upper wing skin was deformed in the downward direction aft of an area of leading-edge damage, and the lower wing skin was deformed and gouged. A right wing spar was also damaged. The damage to the spar and wing skins required major repairs. The flight crew of the nonscheduled air taxi airplane inadvertently landed on runway 30 instead of runway 34 at Chicago Executive Airport, Wheeling, Illinois. Before departure, the captain conducted a time-of-arrival landing distance assessment and calculated a factored landing distance of 4,790 ft. The landing distance available on runway 34 was 5,001 ft. During the visual approach to the airport, the flight crew misidentified runway 30 as runway 34; visually aligned with runway 30, which had an available landing distance of 3,983 ft; and used the runway 30 PAPI lights to provide vertical guidance to the runway. Sufficient landing distance was not available on runway 30, and the captain steered the airplane to the left after realizing that it would not be able to stop before the end of the runway surface. The airplane subsequently overran the runway and came to rest by the airport perimeter fence, causing substantial damage to the right wing. The flight crew did not recognize its runway alignment error until after landing. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
NTSB Findings
Hierarchical cause / factor breakdown from the FAA bulk avdata database. Each finding tagged C (Cause) or F (Factor).
- — Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Flight crew
- — Personnel issues-Action/decision-Action-Incorrect action performance-Flight crew
Verbatim from NTSB's published report. Source file
NTSB_2020_DCA21LA011.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type. Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- NASA NTRS 2024 · Conference Paper
Al6061-RAM2 Development and Hot-Fire Testing using Additive Manufacturing Laser Powder Directed Energy Deposition for Liquid Rocket Engine Channel-Cooled Nozzles
Aluminum 6061-RAM2 is a high-strength aluminum feedstock developed for additive manufacturing (AM)processes. This alloy leverages Reactive Additive Manufacturing (RAM) technology.
- NASA NTRS 2024 · Presentation
Al6061-RAM2 Development and Hot-Fire Testing using Additive Manufacturing Laser Powder Directed Energy Deposition for Liquid Rocket Engine Channel-Cooled Nozzles
Aluminum 6061-RAM2 is a high-strength aluminum feedstock developed for additive manufacturing (AM)processes. This alloy leverages Reactive Additive Manufacturing (RAM) technology.
- arXiv 2022 · arXiv preprint
Zero Touch Coordinated UAV Network Formation for 360° Views of a Moving Ground Target in Remote VR Applications
Unmanned aerial vehicles (UAVs) with on-board cameras are widely used for remote surveillance and video capturing applications.
- NTSB Aircraft Accident Reports 2022 · Accident report
Loss of Control on Takeoff in Icing Conditions — Citation 560XL
Cessna Citation 560XL fatal takeoff icing accident, March 2018. Investigation of a Citation 560XL loss-of-control takeoff accident in icing conditions.
- NASA NTRS 2019 · Technical Memorandum (TM)
Fidelity assessment of a UH-60A simulation on the NASA Ames vertical motion simulator
Helicopter handling qualities research requires that a ground-based simulation be a high-fidelity representation of the actual helicopter, especially over the frequency range of the investigation.
- NASA NTRS 2019 · Other
Differential Pressures on a Pitot-venturi and a Pitot-static Nozzle over 360 Degrees Pitch and Yaw
Measurements of the differential pressures on two navy air-speed nozzles, consisting of a Zahm type Pitot-Venturi tube and a SQ-16 two-pronged Pitot-static tube, in a tunnel air stream of fixed speed …
Browse the full corpus — academia portal ↗