Skip to content

Type Record · As of May 3, 2026

BELL 412EP

Rotorcraft · P&W CANADA PT6T-3 SERIES

Registered

24

Year Range

1995–2008

NTSB Events

4

Airworthiness Directives

50

01 /  Distribution

Where the fleet lives and was built

Counts of currently-registered BELL 412EP aircraft by US state and decade of manufacture, sourced from the FAA Aircraft Registry.

By State (top 10)

  • CA 20.8% 5
  • TX 16.7% 4
  • ID 12.5% 3
  • UT 12.5% 3
  • CO 8.3% 2
  • FL 8.3% 2
  • IL 8.3% 2
  • DE 4.2% 1
  • AK 4.2% 1
  • NE 4.2% 1

By Decade of Manufacture

  • 1990s 29.2% 7
  • 2000s 58.3% 14
  • Unknown 12.5% 3

02 /  NTSB Records

Events involving BELL 412EP aircraft

4 event(s) on file. Showing the most recent 4.

03 /  Airworthiness Directives

FAA directives applicable to BELL 412EP

50 directive(s) on file. Showing the most recent 25 · 25 more in the Federal Register.

  • Feb 3, 2026

    Airworthiness Directives; Leonardo S.p.a. Helicopters

    The FAA is adopting a new airworthiness directive (AD) for all Leonardo S.p.a. Model AB412 and AB412 EP helicopters. This AD was prompted by reports of a cracked main gearbox (MGB) support case. This AD requires revising the existing rotorcraft flight manual (RFM) for the helicopter. The FAA is issuing this AD to addr…

  • May 6, 2025

    Airworthiness Directives; Thommen Aircraft Equipment AG Digital Air Data Computers

    The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. The AD applies to certain Thommen Aircraft Equipment AG (THOMMEN) AC32 Digital Air Data Computers (ADCs). As published, there were typographical errors in the some of the aircraft models in the applicability table. This docum…

  • Apr 10, 2025

    Airworthiness Directives; Thommen Aircraft Equipment AG Digital Air Data Computers

    The FAA is adopting a new airworthiness directive (AD) for certain THOMMEN AIRCRAFT EQUIPMENT AG (THOMMEN) AC32 Digital Air Data Computers. This AD results from occurrences of AC32 Digital Air Data Computers (ADCs) that stop functioning below certain temperatures. This AD requires replacing an affected AC32 Digital AD…

  • Oct 31, 2024

    Airworthiness Directives; Various Helicopters

    The FAA is adopting a new airworthiness directive (AD) for various helicopters modified by certain supplemental type certificates (STCs) that approve the installation of an emergency float kit or an emergency float with a liferaft kit. This AD was prompted by the results of an accident investigation and subsequent rep…

  • Oct 4, 2024

    Airworthiness Directives; Bell Textron Inc. Helicopters

    The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. Model 212, 412, 412CF, and 412EP helicopters. This AD was prompted by reports of cracked tail boom attachment barrel nuts (barrel nuts). This AD requires replacing all steel alloy barrel nuts with nickel alloy barrel nuts, replacing o…

  • Sep 30, 2024

    Airworthiness Directives; THOMMEN AIRCRAFT EQUIPMENT AG Digital Air Data Computers

    The FAA proposes to adopt a new airworthiness directive (AD) for certain THOMMEN AIRCRAFT EQUIPMENT AG (THOMMEN) AC32 Digital Air Data Computers. This proposed AD results from occurrences of AC32 Digital Air Data Computers (ADCs) that stop functioning below certain temperatures. This proposed AD would require replacin…

  • Aug 20, 2024

    Airworthiness Directives; Bell Textron Inc. (Type Certificate Previously Held by Bell Helicopter Textron, Inc.), Helicopters

    The FAA is superseding Airworthiness Directive (AD) 2000-18- 09, which applied to certain Bell Helicopter Textron, Inc. (now Bell Textron Inc.), Model 412, 412CF, and 412EP helicopters. AD 2000-18-09 required repetitively inspecting the upper left-hand cap angle (cap angle) and adjacent structure for a crack and, depe…

  • May 8, 2024

    Airworthiness Directives; Bell Textron Inc., Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Inc., Model 212, 412, 412CF, and 412EP helicopters. This proposed AD was prompted by reports of cracked tail boom attachment barrel nuts (barrel nuts). This proposed AD would require replacing all steel alloy barrel nuts with nickel…

  • Apr 25, 2024

    Airworthiness Directives; Various Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for various helicopters modified by certain supplemental type certificates (STCs) that approve the installation of an emergency float kit or an emergency float with liferaft kit. This proposed AD was prompted by the results of an accident investigation and s…

  • Nov 21, 2022

    Airworthiness Directives; Bell Textron Inc., Helicopters and Various Restricted Category Helicopters

    The FAA is adopting a new airworthiness directive (AD) for Bell Textron Inc., Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters and various restricted category helicopters. This AD was prompted by reports of cracks found on the main transmission support case. This AD requires repetitive inspe…

  • Nov 7, 2022

    Airworthiness Directives; Bell Textron Inc., Erickson 214 Holdings, LLC, Leonardo S.p.a., and Various Restricted Category Helicopters

    The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc., Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters; certain Erickson 214 Holdings, LLC, Model 214B and 214B-1 helicopters; certain Leonardo S.p.a. Model AB412 and AB412 EP helicopters; and certain various res…

  • Jun 1, 2022

    Airworthiness Directives; Bell Textron Inc. Helicopters

    The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. Model 212, 412, 412CF, and 412EP helicopters. This AD was prompted by a report of a cracked check valve. This AD requires inspecting certain engine oil and fuel check valves, and depending on the results, repetitively inspecting and r…

  • Apr 14, 2022

    Airworthiness Directives; Bell Textron Inc., Helicopters and Various Restricted Category Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for Bell Textron Inc., Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters and various restricted category helicopters. This proposed AD was prompted by reports of cracks found on the main transmission support case. This proposed AD w…

  • Apr 4, 2022

    Airworthiness Directives; Bell Textron Inc. Helicopters

    The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. Model 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters with a certain part-numbered tailboom left hand fin spar cap (spar cap) installed. This AD was prompted by reports of cracked spar caps. This AD requires inspecting…

  • Mar 31, 2022

    Airworthiness Directives; Bell Textron Inc., Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Inc., Model 212, 412, 412CF, and 412EP helicopters. This proposed AD was prompted by a report of a cracked check valve. This proposed AD would require inspecting certain engine oil and fuel check valves, and depending on the results,…

  • Mar 23, 2022

    Airworthiness Directives; Bell Textron Inc., Helicopters

    The FAA is adopting a new airworthiness directive (AD) for Bell Textron Inc., Model 412, 412EP, and 412CF helicopters. This AD was prompted by evaluation results showing flight loads that impact the collective lever fatigue life. This AD requires adding a permanent hours time-in-service (TIS) penalty for certain colle…

  • Mar 16, 2022

    Airworthiness Directives; Goodrich Externally-Mounted Hoist Assemblies

    The FAA is adopting a new airworthiness directive (AD) for various model helicopters with certain part-numbered Goodrich externally-mounted hoist assemblies (hoists) installed. This AD was prompted by hoists failing lower load limit inspections. This AD requires replacing unmodified hoists, installing placards, revisi…

  • Jan 21, 2022

    Airworthiness Directives; Bell Textron Inc. Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron Inc. Model 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP helicopters with a certain part-numbered tailboom left hand fin spar cap (spar cap) installed. This proposed AD was prompted by reports of cracked spar caps. This propose…

  • Sep 30, 2021

    Airworthiness Directives; Goodrich Externally-Mounted Hoist Assemblies

    The FAA is revising a notice of proposed rulemaking (NPRM) for various model helicopters with certain part-numbered Goodrich externally-mounted hoist assemblies (hoists) installed. This action revises the NPRM by adding a figure and revising certain requirements. The FAA is proposing this airworthiness directive (AD)…

  • Aug 27, 2021

    Airworthiness Directives; Bell Textron Inc., Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for Bell Textron Inc., Model 412, 412EP, and 412CF helicopters. This proposed AD was prompted by evaluation results showing flight loads that impact the collective lever fatigue life. This proposed AD would require adding a permanent life penalty for certain…

  • Dec 11, 2020

    Airworthiness Directives; Goodrich Externally-Mounted Hoist Assemblies

    The FAA proposes to adopt a new airworthiness directive (AD) for various model helicopters with certain part-numbered Goodrich externally-mounted hoist assemblies (hoists) installed. This proposed AD would require replacing unmodified hoists, installing placards, revising the existing Rotorcraft Flight Manual (RFM) fo…

  • Nov 3, 2020

    Airworthiness Directives; Bell Textron Inc. (Type Certificate Previously Held by Bell Helicopter Textron Inc.) Helicopters

    The FAA is adopting a new airworthiness directive (AD) for all Bell Textron Inc. (Type Certificate previously held by Bell Helicopter Textron Inc.) Model 412, 412CF, and 412EP helicopters. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. This AD was prompted by an accident and…

  • Jul 30, 2020

    Airworthiness Directives; Bell Textron Inc. (Type Certificate Previously Held by Bell Helicopter Textron Inc.) Helicopters

    The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. (Bell) Model 204B, 205A, 205A-1, 205B, 212, 214B, 214B-1, 412, 412CF, and 412EP helicopters. This AD was prompted by a report of a shoulder harness seat belt comfort clip (comfort clip) interfering with the seat belt inertia reel. Thi…

  • Jun 11, 2020

    Airworthiness Directives; Bell Textron Inc. (Type Certificate Previously Held by Bell Helicopter Textron Inc.) Helicopters

    The FAA is superseding Airworthiness Directive (AD) 2011-12-08 for Bell Helicopter Textron Inc. (Bell), Model 205A, 205A-1, 205B, 212, 412, 412CF, and 412EP helicopters. AD 2011-12-08 required a one-time inspection of the tail rotor (T/R) blade for corrosion and pitting. This new AD retains the requirements of AD 2011…

  • Apr 6, 2020

    Airworthiness Directives; Bell Textron, Inc. (Type Certificate Previously Held by Bell Helicopter Textron, Inc.) Helicopters

    The FAA proposes to adopt a new airworthiness directive (AD) for certain Bell Textron, Inc. (Type Certificate previously held by Bell Helicopter Textron, Inc.) (Bell) Model 204B, 205A, 205A-1, 205B, 212, 214B, 214B-1, 412, 412CF, and 412EP helicopters. This proposed AD was prompted by a report of a shoulder harness se…

04 /  Type Certificate Data Sheets

FAA TCDS for BELL 412EP

The TCDS is the legal certification document — weight limits, performance, equipment, AD compliance times, operating limitations. 1 match in the FAA catalog.

06 /  Supplemental Type Certificates

Modifications approved for BELL 412EP

503 STCs on file — every FAA-approved modification, alteration, or installation for this aircraft. STOL kits, avionics, fuel systems, floats, engine swaps, you name it.

  • 02/05/2026

    STC SH3261SO

    Installation of replacement skid tubes.

    Bell Helicopter Textron Inc.

  • 11/21/2025

    STC SR12148LA

    Installation of modified configurations of the Bell Helicopter Textron (BHT) Model 412 “Arm and Bearing Assembly”

    Extex Engineered Products

  • 09/30/2025

    STC SR04465NY

    Installation of the iPad Mount

    Avio Design Group Inc

  • 08/27/2025

    STC SR00258DE

    Installation of an articulating patient loading system.

    Air Methods LLC

  • 07/15/2025

    STC SR09922AC

    Installation of a Foresight MX Condition Monitoring System

    GPMS International Inc.

  • 07/11/2025

    STC SR12068IB

    Installation of the AFI4700 Electronic Flight Instrument

    Alpine Aerotech LP

  • 03/11/2025

    STC SR00256DE

    Installation of a medical oxygen system. MSN 36128 only

    Air Methods LLC

  • 02/06/2025

    STC SH8610SW

    Fabrication of Isolair Eliminator II Model 4600-212/412 Fire Fighting System

    Isolair Inc.

  • 01/20/2025

    STC SR02590AK

    Installation of Bell Lightweight Tailboom Modification

    StandardAero Atlantic USA Inc.

  • 10/08/2024

    STC SR00855DE

    Installation of Tracking Patient Loading System

    Air Methods LLC

  • 07/11/2024

    STC SR04132CH

    Installation of Heli-Preheat Kit, p/n TA3132-1 for 115 volt application in accordance with Heli-Preheat Kit drawing TA3132-1 Revision G, dated December 11, 2023 or later FAA appro…

    HARTZELL PROPELLER LLC

  • 05/08/2024

    STC SR01779LA

    Installation of the Emergency Float Kits

    Dart Aerospace ULC

  • 03/27/2024

    STC SH1415SO

    Installation of Wire Strike Protection system; Configuration #1 - Installation P/N 364-83300-5 (Standard Skid Gear) or P/N 364-83300-7 (High Skid Gear)

    Magellan Aerospace

  • 12/07/2023

    STC SR09453RC

    Installation of cabin seats

    Bell Textron Inc.

  • 12/07/2023

    STC SR09343RC

    Installation of Aero Seats and Systems, Inc., Life Raft Deployment System (LRDS)

    Bell Textron Inc.

  • 10/27/2023

    STC SR00145IB

    Installation of LH and RH Vertical Reference Door(s)

    Transwest Helicopters Ltd.

  • 10/17/2023

    STC SR00142IB

    Installation of the Integrated Health and Usage Monitoring System (HUMS)

    RMCI Canada Inc.

  • 10/10/2023

    STC SR00141IB

    Installation of the Aft Pedestal Stowage Compartment

    Alpine Aerotech LP

  • 08/22/2023

    STC SH4056NM

    Installation of pneumatic door actuators.

    Dart Aerospace USA Inc.

  • 08/10/2023

    STC SR11252DS

    Installation of additional Hoist Cable Cut Switches

    Bell Textron Inc.

  • 04/14/2023

    STC SH3319NM

    Installation of Precise Flight Pulselite Control Unit in the Landing /Taxi Recognition Visual Control Light system,

    Precise Flight Inc

  • 02/03/2023

    STC SR00871LA

    Installation of the Modular Seating System

    LifePort LLC

  • 12/05/2022

    STC SR00080IB

    Installation of the Garmin GRA 55 Radar Altimeter

    Alpine Aerotech LP

  • 09/21/2022

    STC SR03832NY

    Installation of Full Vertical Reference Door P/N D412-761 for Left Hand Vertical Reference Operations

    Dart Aerospace Limited

  • 08/22/2022

    STC SR00058IB

    Installation of J301A Audio Controller

    Alpine Aerotech LP

  • 07/14/2022

    STC SR00047IB

    Installation of VIH Aerospace (VIHA) Pulse Light

    VIH Aerospace Inc

  • 07/12/2022

    STC SR01087DE

    Installation of Emergency Medical Services (EMS) Interior

    Air Methods Corporation

  • 06/15/2022

    STC SR11251DS

    Installation of Human External Cargo (HEC) Hoist

    Bell Helicopter Textron Inc.

  • 06/15/2022

    STC SR11251DS

    Installation of Human External Cargo (HEC) Hoist

    Bell Helicopter Textron Inc.

  • 06/15/2022

    STC SR02590SE

    Installation of a Light Emitting Diode (LED) Annunciator Panel

    Luma Technologies LLC

+ 473 more STCs on file

07 /  PMA replacement parts

FAA-approved replacement parts for BELL 412EP

60+ parts on file from the FAA Parts Manufacturer Approval database. Each is a non-OEM part the FAA has authorized for use as a replacement on this aircraft type.

  • TAI-2061-202-10#https://drs.faa.gov/browse/excelExternalWindow/DAECD0CBE3691D648625836A00502916.0001##

    Exhaust Duct, Assembly of

    Extex Engineered Products Inc replaces 212-061-202-10

    PMA holder →
  • TAI-4040-386-001#https://drs.faa.gov/browse/excelExternalWindow/0DDB9B8ADFFAB16C8625836A00502936.0001##

    Case-Support, Bevel Gear, Transmission, Assembly of

    Extex Engineered Products Inc replaces 204-040-386-1

    PMA holder →
  • TAI-5031-433-005#https://drs.faa.gov/browse/excelExternalWindow/4D067B6FA3AFB31E8625836A0050294F.0001##

    Support-Roller Cargo Door

    Extex Engineered Products Inc replaces 205-031-433-005

    PMA holder →
  • TAI-4031-468-101#https://drs.faa.gov/browse/excelExternalWindow/E8D89FD05B975E3C8625836A0050292B.0001##

    Hinge Half Lower, Crew Door, Assembly of

    Extex Engineered Products Inc replaces 204-031-468-101

    PMA holder →
  • TAI-5031-435-003#https://drs.faa.gov/browse/excelExternalWindow/915BDCFE089E87A08625836A00502956.0001##

    Plate Supt-Roller Cargo Door, Upper Fwd

    Extex Engineered Products Inc replaces 205-031-435-003

    PMA holder →
  • 540-011-449-3AL#https://drs.faa.gov/browse/excelExternalWindow/AF05F954191FC5A48625836A00502901.0001##

    Bearing Set, Ball

    Extex Engineered Products Inc replaces 540-011-449-3

    PMA holder →
  • TAI-2061-202-9#https://drs.faa.gov/browse/excelExternalWindow/B12E2D4A36291F9E8625836A00502917.0001##

    Exhaust Duct, Assembly of

    Extex Engineered Products Inc replaces 212-061-202-9

    PMA holder →
  • TAI-4050-170-001#https://drs.faa.gov/browse/excelExternalWindow/6F07B4D17FE33CAF8625836A00502942.0001##

    Clevis Assembly Ram Ground Handling

    Extex Engineered Products Inc replaces 204-050-170-001

    PMA holder →
  • ASI-4010-404-1#https://drs.faa.gov/browse/excelExternalWindow/2B53F49BF96899278625836A00502904.0001##

    Ring Assembly Swashplate Gimbal

    Extex Engineered Products Inc replaces 204-010-404-1

    PMA holder →
  • TAI-2040-462-001#https://drs.faa.gov/browse/excelExternalWindow/0803261F7DDA98CF8625836A00502915.0001##

    Shaft, Tail Rotor 90 Gear Box

    Extex Engineered Products Inc replaces 212-040-462-1

    PMA holder →
  • TAI-5030-517-001#https://drs.faa.gov/browse/excelExternalWindow/93A56044F107B5B18625836A00502948.0001##

    Pin, Lower, Latch

    Extex Engineered Products Inc replaces 205-030-517-001

    PMA holder →
  • ASI-9011-711-001#https://drs.faa.gov/browse/excelExternalWindow/93273986DBF71DAC8625836A0050290C.0001##

    Idler, Tail Rotor Control, Assembly of

    Extex Engineered Products Inc replaces 209-011-711-1

    PMA holder →
  • TAI-4011-443-003#https://drs.faa.gov/browse/excelExternalWindow/69B3E3DD786549078625836A0050291D.0001##

    Liner, Collective Sleeve

    Extex Engineered Products Inc replaces 204-011-443-003

    PMA holder →
  • TAI-4075-156-003#https://drs.faa.gov/browse/excelExternalWindow/8D995FEAC805930E8625836A00502946.0001##

    Outer Ring, Slip Cargo Suspension, Assembly of

    Extex Engineered Products Inc replaces 204-075-156-003

    PMA holder →
  • TAI-5030-550-002#https://drs.faa.gov/browse/excelExternalWindow/EF69D5DC657301A88625836A0050294A.0001##

    Seal - Cargo Door Assembly of

    Extex Engineered Products Inc replaces 205-030-550-002

    PMA holder →
  • TAI-9011-710-5#https://drs.faa.gov/browse/excelExternalWindow/4EE982F4063E3EE88625836A00502960.0001##

    Control Tube T/R

    Extex Engineered Products Inc replaces 209-011-710-5

    PMA holder →
  • TAI-4011-443-001#https://drs.faa.gov/browse/excelExternalWindow/15A773687D2A688A8625836A0050291C.0001##

    Bearing. & Liner, Assembly

    Extex Engineered Products Inc replaces 204-011-443-001

    PMA holder →
  • TAI-4040-502-009#https://drs.faa.gov/browse/excelExternalWindow/75860361DE06D2EF8625836A00502937.0001##

    Cap Assembly Filler, Oil, Gear Box

    Extex Engineered Products Inc replaces 204-040-502-9

    PMA holder →
  • TAI-5070-725-011#https://drs.faa.gov/browse/excelExternalWindow/31653EF9160A44648625836A0050295E.0001##

    Ring - Safety Belt Attach

    Extex Engineered Products Inc replaces 205-070-725-011

    PMA holder →
  • TAI-4031-658-102#https://drs.faa.gov/browse/excelExternalWindow/2D634F807704A9258625836A0050292E.0001##

    Hinge Half Upper, Crew Door, Assembly of

    Extex Engineered Products Inc replaces 204-031-658-102

    PMA holder →
  • TAI-5031-433-006#https://drs.faa.gov/browse/excelExternalWindow/3432A41AC95AA3A38625836A00502950.0001##

    Support-Roller Cargo Door

    Extex Engineered Products Inc replaces 205-031-433-006

    PMA holder →
  • TAI-4040-603-011#https://drs.faa.gov/browse/excelExternalWindow/9C6BC9C8D6957F908625836A0050293F.0001##

    Coupling, Male Spherical, Driveshaft

    Extex Engineered Products Inc replaces 204-040-603-011

    PMA holder →
  • ASI-4040-811-1#https://drs.faa.gov/browse/excelExternalWindow/E955C1535EF336658625836A00502906.0001##

    Clamp Assembly, Curvic Coupling, Tail Rotor Driveshaft

    Extex Engineered Products Inc replaces 204-040-811-1

    PMA holder →
  • TAI-4040-610-001#https://drs.faa.gov/browse/excelExternalWindow/B9ACB9B409483BE08625836A00502941.0001##

    Plate Assembly-Seal Drive Shaft Coupling, T/R Drive

    Extex Engineered Products Inc replaces 204-040-610-1

    PMA holder →
  • TAI-2030-096-001#https://drs.faa.gov/browse/excelExternalWindow/70C3A260687379638625836A00502910.0001##

    Bolt, Isolation Mount-Pylon

    Extex Engineered Products Inc replaces 212-030-096-1

    PMA holder →
  • TAI-5030-550-001#https://drs.faa.gov/browse/excelExternalWindow/6873DD6B32B142738625836A00502949.0001##

    Seal - Cargo Door Assembly of

    Extex Engineered Products Inc replaces 205-030-550-001

    PMA holder →
  • TAI-4040-130-005#https://drs.faa.gov/browse/excelExternalWindow/797040C27F40E8098625836A00502934.0001##

    Shaft-Bearing, Planetary Pinion, Transmission

    Extex Engineered Products Inc replaces 204-040-130-5

    PMA holder →
  • TAI-4040-132-001#https://drs.faa.gov/browse/excelExternalWindow/751A39B697924D4A8625836A00502935.0001##

    Race-Bearing, Planetary Pinion, Transmission

    Extex Engineered Products Inc replaces 204-040-132-1

    PMA holder →
  • TAI-4011-497-103#https://drs.faa.gov/browse/excelExternalWindow/386F2086577EBB778625836A00502920.0001##

    Bushing-Support Assembly

    Extex Engineered Products Inc replaces 204-011-497-103

    PMA holder →
  • TAI-2040-143-103#https://drs.faa.gov/browse/excelExternalWindow/0E8F9229E67DF6C78625836A00502913.0001##

    Bearing, Ball, Duplex

    Extex Engineered Products Inc replaces 212-040-143-103

    PMA holder →
  • TAI-9011-716-001#https://drs.faa.gov/browse/excelExternalWindow/42B1FF97DD85CD198625836A00502961.0001##

    Bushing-Controls Tail Rotor

    Extex Engineered Products Inc replaces 209-011-716-001

    PMA holder →
  • TAI-4031-658-101#https://drs.faa.gov/browse/excelExternalWindow/6331E27B893F46EA8625836A0050292D.0001##

    Hinge Half Upper, Crew Door, Assembly of

    Extex Engineered Products Inc replaces 204-031-658-101

    PMA holder →
  • TAI-4040-503-003#https://drs.faa.gov/browse/excelExternalWindow/9886C878F5DA86868625836A00502938.0001##

    Cap-Oil Filler, Gear Box

    Extex Engineered Products Inc replaces 204-040-503-3

    PMA holder →
  • TAI-4030-481-001#https://drs.faa.gov/browse/excelExternalWindow/C37B7CD5994F82048625836A00502921.0001##

    Push Rod, Crew Door Latch Assembly of

    Extex Engineered Products Inc replaces 204-030-481-001

    PMA holder →
  • TAI-4010-433-1#https://drs.faa.gov/browse/excelExternalWindow/25C035FB6499626D8625836A00502918.0001##

    Bearing & Liner, Assembly

    Extex Engineered Products Inc replaces 204-010-433-1

    PMA holder →
  • TAI-4030-481-101#https://drs.faa.gov/browse/excelExternalWindow/9E324FC7B45B55A58625836A00502923.0001##

    Push Rod, Crew Door Latch Assembly of

    Extex Engineered Products Inc replaces 204-030-481-101

    PMA holder →
  • TAI-2040-118-101#https://drs.faa.gov/browse/excelExternalWindow/044F2EFCD995A95D8625836A00502912.0001##

    Spacer, Bolt Lift Link, Transmission

    Extex Engineered Products Inc replaces 212-040-118-101

    PMA holder →
  • TAI-2040-117-103#https://drs.faa.gov/browse/excelExternalWindow/A7F72F15797C889F8625836A00502911.0001##

    Bolt, Lift Link

    Extex Engineered Products Inc replaces 212-040-117-103

    PMA holder →
  • TAI-4030-483-003#https://drs.faa.gov/browse/excelExternalWindow/6A15EEE9397EBFEC8625836A00502926.0001##

    Rod, Crew Door Latch, Assembly of

    Extex Engineered Products Inc replaces 204-030-483-003

    PMA holder →
  • TAI-4011-423-1#https://drs.faa.gov/browse/excelExternalWindow/B4A7FD04930327948625836A0050291B.0001##

    Sleeve, Bearing Inner Race S/P Inner Ring

    Extex Engineered Products Inc replaces 204-011-423-1

    PMA holder →

+ 20 more PMA parts on file

09 /  Equivalent Level of Safety findings

ELOS findings issued for BELL 412EP

4 ELOS findings on file. The FAA issues an ELOS when an applicant proposes an alternative means that achieves the same safety outcome as a literal regulation — a standing record of which certification deviations the agency has approved for this model series.

05 /  Aircraft of this type

All 24 registered N-numbers

Every tail currently on the FAA registry for this make/model. Click an N-number to query the FAA Aircraft Inquiry; rows flagged have NTSB events on file. Tails seeded with full TallyAero pages link directly.

24 of 24
N-number St Year NTSB FAA
N1026Y DE 2005 Look up ↗
N110LA CA 2005 · Look up ↗
N11PP ID 2003 · Look up ↗
N14LA CA 2005 · Look up ↗
N21844 CA 1999 · Look up ↗
N219MG CO 1998 · Look up ↗
N22PP ID 1998 · Look up ↗
N233LC UT 2000 Look up ↗
N282SD CA 2008 · Look up ↗
N34JJ AK · Look up ↗
N401TL NE · Look up ↗
N402TL FL 1998 · Look up ↗
N412AC UT 2003 · Look up ↗
N412ES CA 2006 Look up ↗
N412F TX 1996 · Look up ↗
N417AC UT 2002 · Look up ↗
N681FD IL Look up ↗
N682FD IL 2001 · Look up ↗
N721AX ID 1995 · Look up ↗
N77TL FL 1995 · Look up ↗
N813FK TX 2005 · Look up ↗
N87AM CO 2003 · Look up ↗
N985MB TX 2006 · Look up ↗
N993MG TX 2007 · Look up ↗

Source — FAA Aircraft Registry · click "Look up" to query the live registry record (owner, address, last airworthiness)

05 /  Sources & Methodology

Every count traces back to a primary US-government source

We render counts and lists as the agency publishes them. Read the methodology →