Skip to content

Type Record · As of May 3, 2026

GOVERNMENT AIRCRAFT FACTORIES N22B

Fixed Wing Multi Engine · ALLISON 250 SER 250HP

Registered

1

Year Range

1977–1977

NTSB Events

0

Airworthiness Directives

48

01 /  Distribution

Where the fleet lives and was built

Counts of currently-registered GOVERNMENT AIRCRAFT FACTORIES N22B aircraft by US state and decade of manufacture, sourced from the FAA Aircraft Registry.

By State (top 10)

  • FL 100.0% 1

By Decade of Manufacture

  • 1970s 100.0% 1

02 /  NTSB Records

Events involving GOVERNMENT AIRCRAFT FACTORIES N22B aircraft

No NTSB-recorded events match GOVERNMENT AIRCRAFT FACTORIES N22B in the indexed corpus.

03 /  Airworthiness Directives

FAA directives applicable to GOVERNMENT AIRCRAFT FACTORIES N22B

48 directive(s) on file. Showing the most recent 25 · 23 more in the Federal Register.

  • Jun 1, 2010

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A Airplanes

    We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe cond…

  • Mar 9, 2010

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A Airplanes

    We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation…

  • Dec 28, 2009

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A Airplanes

    We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe cond…

  • Oct 22, 2009

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A Airplanes

    We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation…

  • May 20, 2009

    Airworthiness Directives; Hartzell Propeller Inc. Steel Hub Turbine Propellers

    The FAA is adopting a new airworthiness directive (AD) for Hartzell Propeller Inc. steel hub turbine propellers, with any counterweight slug attachment bolts, part number (P/N) B-3386-14H, LFC manufacturing lot 224, installed. This AD requires identifying and removing all counterweight slug attachment bolts, P/N B-338…

  • Oct 19, 2006

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B, N22S, and N24A Airplanes

    The FAA is adopting a new airworthiness directive (AD) to supersede AD 2003-22-13, which applies to all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. AD 2003-22-13 currently requires you to visually inspect the ailerons for damage and replace if necessary; adjust the engine power…

  • Aug 3, 2006

    Airworthiness Directives; Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division, and Detroit Diesel Allison) (RRC) 250-B and 250-C Series Turboshaft and Turboprop Engines

    The FAA is superseding an existing airworthiness directive (AD) for RRC 250-B and 250-C series turboshaft and turboprop engines. That AD currently requires a onetime inspection of the fuel nozzle screen for contamination, and if contamination is found, inspection and cleaning of the entire aircraft fuel system before…

  • Sep 9, 2005

    Airworthiness Directives; Goodrich De-icing and Specialty Systems “FASTprop” Propeller De-icers

    The FAA is adopting a new airworthiness directive (AD) for Goodrich De-icing and Specialty Systems "FASTprop" propeller de- icers, part numbers P4E1188 series, P4E1601 series, P4E2200 series, P4E2271-10, P4E2575-7, P4E2575-10, P4E2598-10, P5855BSW, P6199SW, P6592SW, P6662SW, and P6975-11, installed. This AD requires i…

  • May 23, 2005

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B, N22S, and N24A Airplanes

    The FAA adopts a new airworthiness directive (AD) to supersede AD 2003-14-20, which applies to all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. AD 2003-14-20 requires you to repetitively inspect, using either dye penetrant or magnetic particle methods, the rudder control lever sh…

  • Apr 6, 2005

    Airworthiness Directives; Goodrich De-icing and Specialty Systems “FASTprop” Propeller De-icers

    The FAA proposes to adopt a new airworthiness directive (AD) for Goodrich De-icing and Specialty Systems "FASTprop" propeller de- icers, part numbers P4E1188 series, P4E1601 series, P4E2200 series, P4E2271-10, P4E2575-7, P4E2575-10, P4E2598-10, P5855BSW, P6199SW, P6592SW, P6662SW, and P6975-11, installed. This propose…

  • Mar 16, 2005

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B, N22S, and N24A Airplanes

    The FAA proposes to supersede Airworthiness Directive (AD) 2003-14-20, which applies to all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. AD 2003-14-20 requires you to repetitively inspect, using either dye penetrant or magnetic particle methods, the rudder control lever shafts fo…

  • Mar 31, 2004

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Airplanes

    The FAA adopts a new airworthiness directive (AD) for all AeroSpace Technologies of Australia Pty Ltd Model N22B, N22S, and N24A airplanes. This AD requires you to inspect the forward and aft face of the rear fuselage frame for cracks and to repair or modify accordingly. This AD is the result of mandatory continuing a…

  • Mar 3, 2004

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B, N22S, and N24A Airplanes

    The FAA adopts a new airworthiness directive (AD) for all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B, N22S, and N24A airplanes. This AD requires you to repetitively inspect wing fittings for fatigue defects, replace or correct defective wing fittings, and replace the stub wing front spar assembly…

  • Dec 29, 2003

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Airplanes

    The FAA proposes to adopt a new airworthiness directive (AD) for all AeroSpace Technologies of Australia Pty Ltd Model N22B, N22S, and N24A airplanes. This proposed AD would require you to inspect the forward and aft face of the rear fuselage frame for cracks and to repair or modify accordingly. This proposed AD is th…

  • Nov 13, 2003

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B and N24A Airplanes

    The FAA adopts a new airworthiness directive (AD) for all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. This AD requires you to visually inspect the ailerons for damage and replace if necessary; adjust the engine power levers aural warning microswitches; set flap extension and fla…

  • Oct 24, 2003

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B, N22S, and N24A Airplanes

    The FAA proposes to adopt a new airworthiness directive (AD) for all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B, N22S, and N24A airplanes. This proposed AD would require you to repetitively inspect wing fittings for fatigue defects, replace or correct defective wing fittings, and replace the stub…

  • Aug 18, 2003

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B and N24A Airplanes

    This document proposes to adopt a new airworthiness directive (AD) that would apply to all AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. This proposed AD would require you to visually inspect the ailerons for damage and replace if necessary; adjust the engine power levers aural wa…

  • Jul 21, 2003

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B and N24A Airplanes

    This amendment supersedes Airworthiness Directive (AD) 82-12- 06, which applies to certain AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. AD 82-12-06 currently requires repetitive visual inspections of all rudder control lever shaft assemblies for cracks and discrepancies, and, if…

  • Jun 26, 2003

    Airworthiness Directives; Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) Series and HA-A2V20-1B Series Propellers with Aluminum Blades

    This amendment revises an existing airworthiness directive (AD), that is applicable to Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) series and HA-A2V20-1B series propellers with aluminum blades. That AD currently requires initial and repetitive dye penetrant and eddy current inspections of the blade and an optic…

  • Apr 29, 2003

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B and N24A Airplanes

    This document proposes to supersede Airworthiness Directive (AD) 82-12-06, which applies to certain AeroSpace Technologies of Australia Pty Ltd. (ASTA) Models N22B and N24A airplanes. AD 82-12-06 currently requires repetitive visual inspections of all rudder control lever shaft assemblies for cracks and discrepancies,…

  • Jan 2, 2003

    Airworthiness Directives; Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) Series and HA-A2V20-1B Series Propellers with Aluminum Blades

    The Federal Aviation Administration (FAA) proposes to revise an existing airworthiness directive (AD), applicable to Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) series and HA-A2V20-1B series propellers with aluminum blades. That AD currently requires initial and repetitive dye penetrant and eddy current inspect…

  • Feb 4, 2000

    Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd. Models N22B and N24A Airplanes

    This document adopts a new airworthiness directive (AD) that applies to all AeroSpace Technologies of Australia Pty Ltd. (AeroSpace Technologies) Models N22B and N24A airplanes. This AD requires you to revise the Airplane Flight Manual (AFM) to include requirements for activating the airframe pneumatic deicing boots.…

  • Oct 12, 1999

    Airworthiness Directives; Fairchild Aircraft Corporation SA226 and SA227 Series Airplanes

    This document proposes to adopt a new airworthiness directive (AD) that would apply to all Fairchild Aircraft Corporation (Fairchild) SA226 and SA227 series airplanes. The proposed AD would require revising the Airplane Flight Manual (AFM) to include requirements for activation of the airframe pneumatic deicing boots.…

  • Oct 12, 1999

    Airworthiness Directives; Cessna Aircraft Company Models 208, 208A, and 208B Airplanes

    This document proposes to adopt a new airworthiness directive (AD) that would apply to all Cessna Aircraft Company (Cessna) Models 208, 208A, and 208B airplanes. The proposed AD would require revising the Airplane Flight Manual (AFM) to include requirements for activation of the airframe pneumatic deicing boots. The p…

  • Oct 12, 1999

    Airworthiness Directives; The Cessna Aircraft Company Models 425 and 441 Airplanes

    This document proposes to adopt a new airworthiness directive (AD) that would apply to all The Cessna Aircraft Company (Cessna) Models 425 and 441 airplanes. The proposed AD would require revising the Airplane Flight Manual (AFM) to include requirements for activation of the airframe pneumatic deicing boots. The propo…

04 /  Type Certificate Data Sheets

FAA TCDS for GOVERNMENT AIRCRAFT FACTORIES N22B

The TCDS is the legal certification document — weight limits, performance, equipment, AD compliance times, operating limitations. 1 match in the FAA catalog.

07 /  PMA replacement parts

FAA-approved replacement parts for GOVERNMENT AIRCRAFT FACTORIES N22B

1 parts on file from the FAA Parts Manufacturer Approval database. Each is a non-OEM part the FAA has authorized for use as a replacement on this aircraft type.

  • SMR1889-2#https://drs.faa.gov/browse/excelExternalWindow/A48C17B863F0CF5D862571B9005302FE.0001##

    Wire Harness

    B/E Aerospace Inc, DBA, SMR Technologies Inc replaces Goodrich P/N 4E1889-2

    PMA holder →

05 /  Aircraft of this type

All 1 registered N-numbers

Every tail currently on the FAA registry for this make/model. Click an N-number to query the FAA Aircraft Inquiry; rows flagged have NTSB events on file. Tails seeded with full TallyAero pages link directly.

1 of 1
N-number St Year NTSB FAA
N22NM FL 1977 · Look up ↗

Source — FAA Aircraft Registry · click "Look up" to query the live registry record (owner, address, last airworthiness)

05 /  Sources & Methodology

Every count traces back to a primary US-government source

We render counts and lists as the agency publishes them. Read the methodology →