Design and Implementation of an Unmanned Vehicle using a GSM Network with Microcontrollers

Abstract

Verbatim from arXiv. Not paraphrased, not summarized.

Now-a-days, a lot of research is being carried out in the development of USVs (Unmanned surface vehicles), UAVs (Unmanned Aerial Vehicles) etc. Now in case of USVs generally, we have seen that wireless controlled vehicles use RF circuits which suffer from many drawbacks such as limited working range, limited frequency range and limited control. Moreover shooting infrared outdoors on a bright sunny day is often problematic, since sunlight can interfere with the infrared signal. Use of a GSM network (in the form of a mobile phone, a cordless phone) for robotic control can overcome these limitations. It provides the advantages of robust control, working range as large as the coverage area of the service provider in comparison with that of an IR system, no interference with other controllers. This paper presents a Global System for Mobile Telecommunication (GSM) network based system which can be used to remotely send streams of 4 bit data for control of USVs. Furthermore, this paper describes the usage of the Dual Tone Multi-Frequency (DTMF) function of the phone, and builds a microcontroller based circuit to control the vehicle to demonstrate wireless data communication. Practical result obtained showed an appreciable degree of accuracy of the system and friendliness through the use of a microcontroller.

Author

• Sourangsu Banerji

Keywords

• eess.SY