U-Joint CAAMS: Experimental Evaluation of a Universal-Joint Continuum Manipulator for Aerial Manipulation

Abstract

Verbatim from arXiv. Not paraphrased, not summarized.

Continuum manipulators mounted on multi-rotor UAVs enable compliant aerial manipulation, but payloads and propeller downwash amplify out-of-plane bending and twisting that degrade end-effector pose accuracy. To address this problem, we present a universal-joint-based continuum manipulator designed to improve resistance to out-of-plane deformation during aerial manipulation. The proposed design uses a tubular backbone with spring-reinforced universal joints and an integrated conduit for internal routing and fluid delivery. We evaluate the design in still air and under peak propeller downwash across varying payloads, and benchmark it against a prior Nitinol-backbone CM. Bench tests show improved resistance to out-of-plane deformation across all conditions. Under peak downwash, the proposed design reduces mean error by 2.5-4x in yaw, 2-45x in y-axis, and up to 5x in roll compared to the NiTi-backbone design. We further analyze hover stability through in-flight coupled-disturbance tests over varying payloads and actuation speeds, and demonstrate the system in water sampling, spot spraying, and object transport.

Authors

• Anuraj Uthayasooriyan
• Musab Alibrahim
• Krishna Manaswi Digumarti
• Fernando Vanegas
• Felipe Gonzalez

Keywords

• cs.RO