NTSB CAROL · Event
Event ATL04LA029
Registry · N55YA
FAA Aircraft Registry record.
Make / Model
YAKOVLEV YAK-55M
Year of manufacture
1992 · 11 years old at event
Engine
VEDENEYEV M14P (350 hp)
Seats / Engines
1 seats · 1 engine
Last airworthiness date
20140417
ADS-B equipped
Yes — Mode-S A6FF39
Registrant of record
DAY IAIN A
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
A loss of engine power due to a fractured connecting rod for undetermined reasons.
Factual narrative
HISTORY OF FLIGHT
On October 14, 2003, about 1540 central daylight time, a Yakovliev YAK55M, N55YA, registered to a private owner, operating as a 14 CFR Part 91 personal flight, received substantial damage during a forced landing in a cornfield in the vicinity of Troy, Alabama. Visual meteorological conditions prevailed and no flight plan was filed. The private pilot reported no injuries. The flight originated from Tallahassee, Florida, on October 14, 2003, at 1540 eastern daylight time. The pilot stated he was 8 miles south of Troy, Alabama, at 3,000 feet in cruise flight, when he felt an instantaneous onset of a severe vibration. He reduced power and looked at the instrument panel. He did not observe an illumination of the engine chip detector light. He increased power to see what manifold pressure that he could maintain. The airplane would not maintain cruise flight. He observed a field to his front and initiated a forced landing to the field. He completed an engine shut down and started slipping the airplane to the harvested cornfield. The airplane touched down and rolled about 200 feet when the airplane collided with a berm. The berm decelerated the airplane and launched it back into the air. The airplane touched down again about 150 feet past the berm and rolled about 250 to 300 feet. Once the airplane had stopped he observed the propeller rotating at about 200 to 300 rpm even though the engine was not running. He exited the airplane and secured the propeller with a bungee cord.
PERSONNEL INFORMATION
Review of information on file with the FAA Airman's Certification Division, Oklahoma City, Oklahoma, revealed the pilot was issued a private pilot certificate on June 30, 2000, with ratings for airplane single engine land. The certificate was issued on the basis of and valid only when accompanied by a Canada pilot license. All limitations and restrictions on the Canada pilot license apply. The pilot holds a third class Canada medical certificate issued on May 7, 2003, with no restrictions. The pilot entered on the NTSB Pilot/Operator Aircraft Accident Report that he had accumulated 1,200 total flight hours with 22 hours in the YAK55M, and his last biennial flight review was July 10, 2003.
AIRCRAFT INFORMATION
Review of the airplane logbooks revealed the engine and original propeller were installed on May 23, 1993. The propeller was replaced on June 6, 1995, at 1.2 hours, and on July 1, 1997, at 330.0 hours. The last recorded annual inspection was conducted on April 4, 2003. The total time on the engine and airframe at the time of the inspection was 752 hours. The airplane has flown 28 hours since the annual inspection, and had accumulated 780 total hours at the time of the accident.
METEOROLOGICAL INFORMATION
The closest weather reporting facility was Troy Municipal Airport, Troy, Alabama, located 8 miles west of the accident site at an elevation of 397 feet msl. The Troy Municipal Airport weather observation at 1453 was, wind 250 degrees at 10 knots, visibility 10 miles, few clouds at 4,500 feet, temperature 81-degress Fahrenheit, dew point temperature 64-degrees Fahrenheit, and altimeter 29.78.
WRECKAGE AND IMPACT INFORMATION
The airplane was transported to Griffin, Georgia, for further examination. Examination of the airframe revealed wrinkling and crush damage forward and aft of the right wing attach points. Removal of the lower fuselage cabin floor revealed one rib and one stringer were buckled. Examination of the propeller assembly revealed the propeller hub was intact and all three propeller blades did not sustain any damage. The propeller turned freely without any restriction. The engine assembly was in place and all engine mounts, and all engine bolts were tight and secure. The engine was disassembled and revealed the propeller shaft had a planar fracture, perpendicular to the axis of the shaft. In addition, all of the connecting rods on the master and articulated rod assembly were broken and battered. The propeller shaft, crankshaft with connecting rods, and 9 cylinder assemblies were forwarded to the NTSB Materials Laboratory for further examination. Examination of the propeller shaft revealed it failed due to torsional overstress. All of the connecting rods were fractured. Post separation damage obliterated the fracture features and no determination of the failure modes could be determined.
MEDICAL AND PATHOLOGICAL INFORMATION
The pilot was not injured and toxicology specimens were not requested from the pilot.
ADDITIONAL INFORMATION
The propeller shaft, master and articulated rod assembly, and nine engine cylinders were released to Atlanta Air Recovery, Griffin, Georgia, on July 27, 2004. The pilot stated he was at 3,000 feet in cruise flight, when he felt an instantaneous onset of a severe vibration. He reduced power and looked at the instrument panel. He did not observe an illumination of the engine chip detector light. He increased power to see what manifold pressure that he could maintain. The airplane would not maintain cruise flight. He observed a field to his front and initiated a forced landing to the field. He completed an engine shut down and started slipping the airplane to the harvested cornfield. The airplane touched down, rolled about 200 feet, and collided with a berm. Examination of the airplane revealed the propeller would continue to turn without the engine running. The propeller assembly was disassembled and the propeller shaft was fractured. Disassembly of the engine revealed all 9 connecting rods were fractured. The propeller shaft and connecting rods were examined by the NTSB Materials Laboratory. Post separation damage of the connecting rods had totally obliterated the fracture surfaces of the connecting rods making the determination of the failure modes impossible. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2003_ATL04LA029.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type or causal vocabulary (stall). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- NASA NTRS 2026 · Conference Paper
Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- arXiv 2023 · arXiv preprint
Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications
This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors.
- arXiv 2023 · arXiv preprint
Variation of Critical Crystallization Pressure for the Formation of Square Ice in Graphene Nanocapillaries
Two-dimensional square ice in graphene nanocapillaries at room temperature is a fascinating phenomenon and has been confirmed experimentally.
- arXiv 2023 · arXiv preprint
Polycrystallinity enhances stress build-up around ice
Damage caused by freezing wet, porous materials is a widespread problem, but is hard to predict or control. Here, we show that polycrystallinity makes a great difference to the stress build-up process…
- arXiv 2022 · arXiv preprint
Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall
Icing on three-dimensional wings causes severe flow separation near stall. Standard improved delayed detached eddy simulation (IDDES) is unable to correctly predict the separating reattaching flow due…
- Embry-Riddle Scholarly Commons 2021 · Journal article (JAAER)
Analysis on the Negative Emotional, Physiological, and Cognitive Responses Elicited from of the Activation of a Stall Alarm
Failing to identify an aerodynamic stall can lead to the inability of an aircraft to sustain flight. To warn pilots of an impending or fully-developed stall, many aircraft have safety devices installe…
Browse the full corpus — academia portal ↗