Skip to content

Atlas / NTSB / FTW99LA202

NTSB CAROL · Event

Event FTW99LA202

1999-07-27 ALVIN, Texas, United States Airport · 6R5 None 1 aircraft Status: Completed

Registry · N2721J

FAA Aircraft Registry record.

Make / Model

CESSNA A150M

Year of manufacture

1974 · 25 years old at event

Engine

CONT MOTOR 0-200 SERIES (100 hp)

Seats / Engines

2 seats · 1 engine

Last airworthiness date

19741024

ADS-B equipped

Yes — Mode-S A2B06E

Registrant of record

DE AVIATION INC

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The flight instructor's excessive rotation while performing a soft field takeoff, which resulted in a delayed lift-off and the ensuing failure to attain obstacle clearance.

Factual narrative

On July 27, 1999, at 1245 central daylight time, a Cessna A150M airplane, N2721J, was substantially damaged when it struck a stop sign and terrain during the takeoff initial climb from Alvin Airpark in Alvin, Texas. The flight instructor and student pilot aboard the airplane were not injured. The airplane was owned by De Aviation, Inc., of La Porte, Texas, and operated by Harvey and Rihn Aviation of La Porte. No flight plan was filed and visual meteorological conditions prevailed for the 14 Code of Federal Regulations Part 91 instructional flight. When the accident occurred, the airplane was departing Alvin Airpark en route to the La Porte Municipal Airport in La Porte, Texas. The flight instructor reported that the student was performing the takeoff with a flap setting of 10 degrees from the 1,500-foot grass runway. "About halfway down the runway," the instructor "realized it would be real close, if [they] made it." He assumed control of the airplane and held "the yoke back to do a soft field takeoff." The instructor stated that he thought he "pulled the nose up too far and dragged the tail." After becoming airborne, the airplane collided with a stop sign located off the airport property. Subsequently, the airplane impacted in a field, the nose landing gear collapsed, and the airplane came to rest nose down in a barbed wire fence. The flight instructor reported that he had accumulated a total of 827 flight hours. He further reported that he had given a total of 94 hours of flight instruction of which 45 hours were in a Cessna 150. No information was provided on the Pilot/Operator Aircraft Accident Report (NTSB Form 6120.1/2) completed by the instructor regarding the flight experience of the student pilot. The student pilot did not respond to a letter from the NTSB investigator-in-charge requesting a written statement describing the accident. According to the FAA inspector, who examined the airplane, the left and right wing leading edges were dented, the firewall was wrinkled, and the left wing spar was damaged. During a dual instructional flight, the airplane struck a stop sign on takeoff initial climb and then impacted terrain. The flight instructor reported that the student initiated the takeoff from the 1,500-foot grass runway. 'About halfway down the runway,' the instructor 'realized it would be real close, if [they] made it.' He assumed control of the airplane and held 'the yoke back to do a soft field takeoff.' The instructor stated that he thought he 'pulled the nose up too far and dragged the tail.' After becoming airborne, the airplane collided with a stop sign located off the airport property. Subsequently, the airplane impacted in a field, the nose landing gear collapsed, and the airplane came to rest nose down in a barbed wire fence. The flight instructor had accumulated 827 total flight hours and had given 94 hours of flight instruction of which 45 hours were in a Cessna 150. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_1999_FTW99LA202.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.