IAD96LA062
1996-04-14 · SALUDA, Virginia, United States · Minor · 1 aircraft · Status: Completed
Airport W75
Current FAA registration · N1356S
- Make / Model
- CESSNA 182P
- Year of manufacture
- 1976 · 20 years old at event
- Engine
- CONT MOTOR O-470 SERIES (230 hp)
- Seats / Engines
- 4 seats · 1 engine
- Last airworthiness date
- 19760706
- ADS-B equipped
- Yes — Mode-S A090FF
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
was the pilot's failure to follow the manufacturer's recommended approach reference speed (VREF) during the approach.
Factual narrative
On April 14, 1996, at 1312 eastern daylight time, a Cessna 182, N1356S, ran off the end of runway 36 after landing at Hummel Field, in Saluda, Virginia. The airplane sustained substantial damage when it nosed over in the grass, and came to rest inverted. The certificated private pilot and the two passengers reported minor injuries. Visual meteorological conditions prevailed at the time of the accident, no flight plan was filed. The flight was conducted under 14 CFR 91, and originated in Williamsburg, Virginia, at about 1230. The pilot reported that when he approached runway 36 (2,261 feet long), he "...intentionally came in a little high due to...the auto traffic that runs perpendicular to runway 36... ." The pilot explained that as the airplane descended through about 200 feet, he extended the flaps to "...approximately 30-35 degrees to give me a higher sink rate. When I landed and applied brakes, my plane pulled hard left and I experienced only partial braking." He added that "...my touchdown speed was between 65 and 70 knots." The Cessna Pilot's Operating Handbook (POH) for the Cessna 182 states: "For a short field landing, make a power-off approach at 60 KIAS (knots indicated airspeed) with 40 degrees of flaps and land on the main wheels first." According to the Federal Aviation Administration (FAA) Flight Training Handbook, "...to land within a short field or a confined area, the pilot must have precise, positive control of the rate of descent and airspeed to produce an approach that will clear any obstacles, result in little or no floating during the roundout, and permit the airplane to be stopped in the shortest possible distance." The Flight Training Handbook further stated "...the approach speed should be no higher than...[the manufacturer's recommended approach speed]...An excessive amount of airspeed could result in touchdown too far from the runway threshold or an after landing roll that exceeds the available landing area." Excerpts from the Cessna POH and the FAA Flight Training Handbook are appended. The FAA Inspector reported that he "...found the flap indicator and flaps at approximately 50% down [20 degrees] when I inspected the aircraft following the accident. To my knowledge, no one had tampered with the flaps or anything else on the aircraft before we arrived at Hummel Airport." The FAA Airworthiness Inspector reported that he "...checked both brakes for proper operation and condition, and no faults were found that could have led to a runway end excursion." The FAA Airworthiness Inspector added that he "...Interviewed [the mechanic], who maintains this aircraft at the Williamsburg (JGG) airport, and he also stated that he has been unable to find anything mechanically wrong with the brakes on this aircraft. He also never noticed any discrepancies with the brakes, while taxiing the aircraft, after completion of maintenance." The pilot reported that he '...intentionally came in a little high due to...the auto traffic that runs perpendicular to runway 36... .' The pilot stated: 'When I landed and applied brakes, my plane pulled hard left and I experienced only partial braking.' The airplane continued off the end of the runway, nosed over, and came to rest inverted. The pilot stated that '...my touchdown speed was between 65 and 70 knots.' The POH for the accident aircraft recommended a touchdown speed of 60 knots. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_1996_IAD96LA062.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Search this event elsewhere
External sources are reported, not agency: signal that something happened, not fact about what happened.
- TallyAero Live Wire Aviation press
- NTSB CAROL Agency ↗
- NTSB Docket Agency ↗
- Aviation Safety Network Aviation press ↗
- Kathryn's Report Aviation press ↗
- Aviation Herald Aviation press ↗
- AVweb Aviation press ↗
- Pilots of America Community ↗
- Reddit /r/flying Community ↗
- FlightAware Aviation press ↗
- AOPA accident database Aviation press ↗
- Google News News ↗
- DuckDuckGo News ↗
Related research
Matched on aircraft type or causal vocabulary (maintenance). All research papers
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA) From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- Semantic Scholar 2026 · Article (Reliability Engineering & System Safety) Understanding human error in military aviation maintenance: The role of Performance shaping factors, cognitive workload and error orientation
- Semantic Scholar 2025 · Article (Applied Sciences) Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Semantic Scholar 2024 · Article (Defence Science Journal) Modelling of Human Factors in Aviation Maintenance Using HFACS ME Human Factors Analysis and Classification System Maintenance Extension and Bayesian Network
Aircraft maintenance is a complex task involving a skilled human workforce, spare parts, and various other resources. Human factors are an inherent element of the human workforce.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER) Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…