Skip to content

Atlas / NTSB / LAX00LA184

NTSB CAROL · Event

Event LAX00LA184

2000-05-07 BURBANK, California, United States Airport · BUR None 1 aircraft Status: Completed

Registry · N1ML

FAA Aircraft Registry record.

Make / Model

GLASAIR GLASAIR III

Year of manufacture

1993 · 7 years old at event

Engine

LYCOMING IO-540-K1G5 (300 hp)

Seats / Engines

2 seats · 1 engine

Last airworthiness date

20150311

ADS-B equipped

Yes — Mode-S A00120

Registrant of record

BACKES EVAN J

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The failure of the pilot to maintain a proper glidepath, which resulted in a collision with a power pole and damage to the landing gear.

Factual narrative

On May 7, 2000, at 1307 hours Pacific daylight time, an amateur built McCoy Glasair III airplane, N1ML, veered off the runway and collided with a taxiway sign on the landing rollout at the Burbank-Glendale-Pasadena Airport, Burbank, California. The airplane, owned and operated by the commercial pilot under the provisions of 14 CFR Part 91, sustained substantial damage. The personal, local area flight, originated from the Whiteman, California, airport at 1245. The commercial pilot, sole occupant, was uninjured. Visual meteorological conditions prevailed and no flight plan was filed. The pilot reported that he was practicing touch-and-go landings on runway 12 at Whiteman. On final approach, he experienced a downdraft and the airplane dropped approximately 75 feet. He added power to initiate a go-around, but was unable to gain altitude. The pilot heard a "thud" and realized that the right main landing gear had struck a telephone pole and had separated from the airplane. He performed a low approach by the Air Traffic Control Tower (ATCT) and they confirmed that his right landing gear was missing. He then requested to make an emergency landing at the Burbank Airport (approximately 5 miles southeast) due to the availability of ARFF personnel. After performing a low approach, for Burbank ATCT to observe the damage, the pilot was cleared to land on runway 15. On the landing roll the remaining landing gear collapsed, and the airplane veered off the runway, striking a taxiway sign with the right wing. Review of the aviation surface observations for the hour before and after the accident revealed winds out of the west at 7 knots. No unusual meteorological conditions were reported. The purpose of the flight was to practice takeoff's and landings at a nearby airport. According to the pilot, while on final approach, the airplane experienced a downdraft and lost about 75 feet in altitude. The pilot initiated a go-around, but was unable to arrest the descent. The airplane's right main landing gear struck a telephone pole and was sheared off. The pilot requested to make an emergency landing at the accident airport due to the availability of ARFF equipment. After landing, the remaining landing gear collapsed, and the airplane veered off the runway and struck a taxiway sign with the right wing. Review of the aviation surface observations for the hour before and after the accident revealed winds out of the west at 7 knots. No unusual meteorological conditions were reported. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2000_LAX00LA184.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

What the literature says.

Academic papers and agency reports matching this event's aircraft type or causal vocabulary (icing, go-around). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.

Browse the full corpus — academia portal ↗