NTSB CAROL · Event
Event NYC07LA087
Registry · N527PA
FAA Aircraft Registry record.
Make / Model
GATES LEAR JET 36A
Year of manufacture
1976 · 31 years old at event
Engine
GARRETT TFE731 SERIES
Seats / Engines
10 seats · 2 engines
Last airworthiness date
19981223
ADS-B equipped
Yes — Mode-S A6A435
Registrant of record
PHOENIX AIR GROUP INC
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The failure of the landing gear tires due to foreign object damage (FOD) on the runway. Contributing to the accident was the failure of the drag chute.
Factual narrative
On March 26, 2007, at 0730 eastern daylight time, a Gates Learjet 36A, N527PA, was substantially damaged during takeoff from the Newport News/Williamsburg International Airport (PHF), Newport News, Virginia. Both certificated airline transport pilots were not injured. Instrument meteorological conditions prevailed, and an instrument flight rules (IFR) flight plan was filed for the local public use flight conducted under 14 Code of Federal Regulations Part 91. According to the operator, the purpose of the flight was to comply with a contract to support U.S. Navy operations. According to the pilots, as the airplane approached 120 knots during the takeoff roll from runway 20, they heard a "loud pop." The airplane began to pull to the left, and the pilot flying (PF) aborted the takeoff by retarding the throttles and applying maximum braking. The airplane began to "fishtail" down the runway and the pilot not flying (PNF) activated the drag chute. The drag chute appeared to be inoperative, and the pilots were unable to stop the airplane on the runway. The airplane continued off the right side, impacted a runway light, and came to rest in the grass. Examination of the airplane by a Federal Aviation Administration (FAA) inspector revealed that both of the left main landing gear tires had blown, and the left main landing gear was separated from the airplane. The strap of the drag chute had separated at the woven loop used to secure the drag chute to the airplane, and the strap was located in the vicinity of the blown tires. Additionally, substantial damage was noted to the left wing spar. The airplane had been modified with "pods" on both wings, in compliance with a Supplemental Type Certificate (STC), to support its military missions. The weight of the aircraft at takeoff was approximately 17,112 pounds. The maximum gross weight of the airplane was 18,300 pounds. Airport personnel reported observing rocks and pieces of metal on the runway after the accident. Runway 20 was a 6,526-foot-long and 150-foot-wide, concrete runway. According to maintenance records maintained by the operator, the tires were installed on March 3, 2007. Both wheels had 19.83 hours and 10 cycles since their installation. Due to severe fragmentation of the tires, the origin of the tire failure could not be identified. A review of the Learjet 36A Airplane Flight Manual, "Aborted Takeoff" checklist read as follows: "1. Thrust Levers - IDLE 2. Wheel Brakes - Apply 3. Spoilers - EXT 4. Drag Chute or Thrust Reversers (if installed) - Deploy, if necessary 5. Tailcone Access Door - Close and secure. Check chute riser does not jam the deployment ring as tailcone access door is closed. NOTE: If drag chute deployment occurs above 150 KIAS, or if jettison or failure occurs above 100 KIAS, the drag chute system and adjacent structure must be thoroughly inspected for damage before the next flight. The drag chute should be deployed on landing at least once during each six-month interval. The drag chute should then be inspected and re-packed per the Maintenance Manual instructions." According to maintenance records provided by the operator, the drag chute was most recently re-packed during a routine inspection, on January 18, 2007, at 15,093 hours. The airplane flew 59 hours since the inspection. The drag chute had not been deployed prior to, or after the inspection. After the accident, the operator changed their procedures, to mirror the manufacturer guidance of deploying chutes prior to scheduled inspection/repack cycles. The captain held an airline transport pilot certificate with ratings for airplane single-engine and multiengine land. His most recent FAA first-class medical certificate was issued on June 29, 2006. The first officer held an airline transport pilot certificate with ratings for airplane single-engine land and multiengine airplane. His most recent FAA second-class medical certificate was issued on October 9, 2006. According to operator records, the captain had accumulated 3,510 hours of total flight experience, 3,162 hours of which were in make and model. The first officer had accumulated 20,960 hours of total flight experience, 562 hours of which were in make and model. The weather reported at PHF, at 0654, included wind from 300 degrees at 8 knots, 8 miles visibility, overcast clouds at 600 feet, temperature 4 degrees Celsius (C), dew point 2 degrees C, and altimeter setting 29.77 inches mercury. During the takeoff roll, the flightcrew heard a "loud pop," and the airplane began to pull to the left. The pilot flying (PF) aborted the takeoff, and the airplane began to "fishtail" down the runway. The drag chute was activated by the pilot not flying (PNF); however, it appeared to be inoperative and the pilots were unable to stop the airplane on the runway. The airplane continued off the right side, impacted a runway light, and came to rest in the grass. Examination of the airplane revealed that both of the left main landing gear tires had blown, and the left main landing gear was separated from the airplane. Due to severe fragmentation of the tires, the origin of the tire failure could not be identified. Additionally, the strap of the drag chute had separated from the airplane, and was located in the vicinity of the blown tires. Airport personnel reported observing rocks and pieces of metal on the runway after the accident. Both tires were installed on the airplane approximately 3 weeks prior to the accident, and had accumulated 19 hours and 10 cycles since their installation. According to the airplane manufacturer, the drag chute should be deployed on landing at least once during each six-month interval. The drag chute should then be inspected and re-packed per the Maintenance Manual instructions. According to maintenance records, the drag chute was most recently re-packed during a routine inspection, three months prior to the accident, and the airplane had flown 59 hours since then. The drag chute had not been deployed prior to, or after the inspection. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2007_NYC07LA087.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type or causal vocabulary (stall, maintenance). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- Embry-Riddle Scholarly Commons 2023 · Conference paper
The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA)
From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- NASA NTRS 2026 · Conference Paper
Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- Semantic Scholar 2025 · Article (Applied Sciences)
Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
Browse the full corpus — academia portal ↗