Skip to content

Atlas / NTSB / SEA06CA023

NTSB CAROL · Event

Event SEA06CA023

2005-12-03 Sandpoint, Idaho, United States None 1 aircraft Status: Completed

Registry · N543MD

FAA Aircraft Registry record.

Make / Model

DIAMOND AIRCRAFT HK 36 TTC

Year of manufacture

2003 · 2 years old at event

Engine

ROTAX SEE BOMBADIER

Seats / Engines

2 seats · 1 engine

Last airworthiness date

20030718

ADS-B equipped

Yes — Mode-S A6E428

Registrant of record

SILVARDO SOARING INC

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

Excessive speed for the landing roll and inadequate remedial action for the initial takeoff. An object near the end of the runway and snow covered surface were factors.

Factual narrative

On December 3, 2005, about 1600 Pacific standard time, a Diamond Aircraft Industries HK 36 TTC, N543MD powered glider, registered to and operated by the pilot as a 14 CFR Part 91 instructional flight, collided with a tractor during takeoff from a private airstrip near Sandpoint, Idaho. Visual meteorological conditions prevailed at the time and no flight plan was filed. The glider was substantially damaged and the private pilot owner and flight instructor were not injured. The flight departed from Sandpoint Airport about 30 minutes prior to the accident. During a telephone interview and subsequent written statement, the pilot stated that they had been practicing short field approaches at the Sandpoint Airport, then decided to go to the owner's property where he had a private airstrip. The pilot stated that the flight instructor was flying the glider, making a low approach over the airstrip when he unexpectedly decided to land. The airspeed was too high to stop on the remaining runway which was covered with compacted snow. After rolling about 300 feet, the flight instructor applied full throttle for the takeoff. The pilot pointed out the power lines beyond the end of the runway, and the flight instructor stated that they would fly under them. At this time the left wing struck a tractor that was positioned at the end of the airstrip. The wing separated from the airframe and the glider spun around, coming to rest. The pilot stated that there was no mechanical failure or malfunction with the glider at the time of the accident. The pilot stated that he had been practicing short field approaches at the Sandpoint Airport with a flight instructor and then decided to go to his property where he had a private airstrip. The pilot stated that the flight instructor was flying the glider, making a low approach over the airstrip when he unexpectedly decided to land. The airspeed was too high to stop on the remaining runway which was covered with compacted snow. After rolling about 300 feet, the flight instructor applied full throttle for the takeoff. The pilot pointed out the power lines beyond the end of the runway, and the flight instructor stated that they would fly under them. At this time the left wing struck a tractor that was positioned at the end of the airstrip. The wing separated from the airframe and the glider spun around, coming to rest. The pilot stated that there was no mechanical failure or malfunction with the glider at the time of the accident. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2005_SEA06CA023.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

What the literature says.

Academic papers and agency reports matching this event's aircraft type or causal vocabulary (icing). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.

Browse the full corpus — academia portal ↗