NTSB CAROL · Event
Event ERA20LA216
Registry · N473TT
FAA Aircraft Registry record.
Make / Model
BELL 47G-3B-1
Year of manufacture
1968 · 52 years old at event
TCDS
2H3 · SCOTT'S-BELL 47 INC
Engine
LYCOMING TVO-435-GIA (280 hp)
Seats / Engines
3 seats · 1 engine
Last airworthiness date
19840322
ADS-B equipped
Yes — Mode-S A5CDFA
Registrant of record
JJ AVIATION LLC
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
A total loss of engine power due to a blocked fuel line; the reason for the blockage could not be determined based on the available evidence.
Factual narrative
On June 14, 2020, about 2030 central daylight time, a Bell 47G, N473TT, was substantially damaged when it was involved in an accident near Burnett Heliport (59TN), Atoka, Tennessee. The pilot and two passengers were not injured. The helicopter was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. According to the pilot, on the day of the accident, he was providing short (7- to 8-minute) nonrevenue passenger flights. The pilot had completed eight flights uneventfully. The pilot had added 20 gallons of fuel (10 gallons to each tank) to the helicopter before the eighth flight, for a total of about 39 gallons. During the ninth flight, when the helicopter was about 1.5 miles north of 59TN and was descending through 900 ft mean sea level, the engine lost all power. The pilot performed an autorotation to a field; during touchdown, the main rotor blade struck the tailboom, which severed the aft 20 inches of the tailboom, including the tail rotor, from the airframe. Postaccident examination of the accident site revealed that the helicopter came to rest upright in the field. All major components of the helicopter were found. The engine showed no evidence of a preimpact malfunction, and all components were present. The hydraulic pump was removed for access to the drive so that the crankshaft could be turned. One spark plug was removed in each cylinder for a compression check, and the crankshaft was rotated using a tool inserted in the pump drive pad. Continuity of the crankshaft, camshaft, and valve train was confirmed. A borescope inspection of the cylinders found no anomalies. Both magnetos rotated normally, and the timing was within normal limits. All ignition leads and spark plugs appeared to be completely functional. The air filter and induction system inspection indicated no obstruction to air flow. The throttle had a normal operating range. The fuel line to the carburetor appeared to have collapsed, and about 4 ounces of fuel drained from the system after disconnecting the line. The fuel line was inspected using a borescope, and no light passed through the fuel line. The borescope was then pushed through the fuel line, and no contaminates were found. Both the left and right fuel tanks tested normal for 100LL fuel with no contamination. The fuel sample obtained from the fuel supply system on the support truck was determined to be uncontaminated. The fuel line was subsequently examined by the National Transportation Safety Board’s Materials Laboratory. No blockages were observed; the interior of the hose appeared undamaged and intact; and no evidence of kinks, creases, or material creep was observed on the exterior of the fuel line. The pilot had conducted eight brief (7- to 8-minute) nonrevenue passenger flights uneventfully on the day of the accident. The helicopter was fueled before the eighth flight. During the ninth flight, the helicopter’s engine lost total power when the helicopter was about 1.5 miles north of the heliport and was descending through an altitude of 900 ft mean sea level. The pilot executed an autorotation and landed in a field. On touchdown, the main rotor blade struck the tailboom. Postaccident examination of the airframe and engine revealed no evidence of any preimpact malfunctions except for the fuel line to the carburetor, which had collapsed. A borsescope inspection revealed that light could not be observed through the fuel line. The borescope was then pushed through the fuel line, and no contaminates were found. A subsequent metallurgical examination of the fuel line revealed no blockages; no damage to the interior of the hose; and no evidence of kinks, creases, or material creep. The blocked fuel line likely resulted in the loss of engine power; however, the reason for the blockage could not be determined. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12
NTSB Findings
Hierarchical cause / factor breakdown from the FAA bulk avdata database. Each finding tagged C (Cause) or F (Factor).
- — Not determined-Not determined-(general)-(general)-Unknown/Not determined
- — Aircraft-Aircraft power plant-Engine fuel and control-(general)-Malfunction
Verbatim from NTSB's published report. Source file
NTSB_2020_ERA20LA216.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.