NTSB CAROL · Event
Event LAX02LA104
Registry · N7774G
FAA Aircraft Registry record.
Make / Model
CESSNA 172L
Year of manufacture
1970 · 32 years old at event
Engine
LYCOMING 0-320 SERIES (180 hp)
Seats / Engines
4 seats · 1 engine
Last airworthiness date
19701009
ADS-B equipped
Yes — Mode-S AA85F3
Registrant of record
ELLIOTT MILES
Source: FAA Aircraft Registry (releasable master file).
Aircraft involved
Probable cause & findings
The pilot's failure to comply with maintenance/inspection requirements that resulted in a propeller failure.
Factual narrative
HISTORY OF FLIGHT
On March 7, 2002, at 1407 mountain standard time, a Cessna 172L, N7774G, experienced a propeller blade failure during departure from the Bullhead City/Laughlin International Airport, Bullhead City, Arizona. The student pilot landed on the remaining runway and overrun area. Neither the pilot nor his passenger were injured. Examination of the airplane revealed substantial damage had occurred to the airplane structure. Visual meteorological conditions prevailed for the originating personal flight operating under the provisions of 14 CFR Part 91, and no flight plan was filed. Control tower personnel reported that shortly after takeoff from runway 16, about 800 feet above the runway, the airplane experienced a mechanical problem and returned to the runway. They also noted damage to the front of the engine compartment with debris scattered on the runway. Preliminary examination of the airplane revealed a disintegrated propeller hub with loss of propeller blades and a severed crankshaft aft of the shaft flange. Substantial damage was evident to the firewall assembly. The engine was pointing downward about 30 degrees, suspended by engine controls and hoses. A Federal Aviation Administration (FAA) inspector interviewed the pilot. The pilot stated that there were no prior indications of a discrepancy with the engine or airframe during the run-up or takeoff. He said that the engine ran smoothly until there was a big explosion that "took off the front end."
PERSONNEL INFORMATION
According to logbook information, the student pilot was found competent to make safe solo flights in a Cessna 172 on February 25, 2000, valid for 90 days, and again on June 13, 2001. He was found competent to perform solo cross-country flights on March 5 and March 10, 2000. According to FAR 61.83(c) a student must hold at least a current third-class medical certificate issued under part 67 of this chapter. The pilot's last recorded third-class flight physical occured on June 13, 1999. According to FAR 61.89a (2), a student pilot may not act as pilot-in-command of an aircraft that is carrying a passenger.
AIRCRAFT INFORMATION
The last documented annual inspection of the airplane occured in January 2001, an inspection that is required every 12 months per FAR 91.409a (1), as are other inspections and procedures. According to records, the propeller was installed on the airplane during a powerplant modification February 1, 1988, at airplane tachometer reading of 3,966 hours. The propeller had been overhauled August 24, 1987, at 1,971 hours. At the time of the accident the propeller had accrued 313 hours since overhaul, over 14 years ago. The McCauley factory recommended overhaul is 1,200 hours or 60 months. Examination of the propeller hub revealed that cracks progressed from a corrosion pit inside the hub to a point of overload failure. McCauley Service Bulletins 213 and 213A were issued January 20, 1994, and June 5, 1998, to provide improved lubrication and corrosion protection, as well as a built-in means of crack detection. According to SB 213A, the recommended compliance time for propellers greater than 900 hours or 59-calendar months since last overhaul/penetrant inspection is within the next 100 hours, or at the next annual inspection, whichever occurs first.
ADDITIONAL INFORMATION
The owner/operator failed to file or return a Pilot/Operator Aircraft Accident Report, NTSB Form 6120.1/2. During the takeoff departure the student pilot experienced a catastropic failure of the propeller. Control tower personnel reported that shortly after takeoff, about 800 feet above the runway, the airplane experienced a mechanical problem and returned to the runway. They also noted substantial damage to the front of the engine compartment with debris scattered on the runway. Preliminary examination of the airplane revealed a disintegrated propeller hub with loss of a propeller blade and a severed crankshaft aft of the shaft flange. Substantial damage was evident to the firewall assembly with the engine pointing down about 30 degrees. The pilot stated that there were no prior indications of a discrepancy with the engine or airframe during the run-up or takeoff. He said that the engine ran smoothly until there was a big explosion that "took off the front end." The last documented annual inspection occured in January 2001; an inspection that is required every 12 months per FAR 91.409a (1), as are other inspections and procedures. According to records, the propeller was installed on the airplane during a powerplant modification February 1, 1988, at airplane tachometer reading of 3,966 hours. The propeller had been overhauled August 24, 1987, at 1,971 hours. At the time of the accident, the propeller had accrued 313 hours since overhaul, over 14 years prior. The McCauley factory recommended overhaul is 1,200 hours or 60 months. Examination of the propeller hub revealed a crack progression from a corrosion pit inside the hub to a point of overload failure. McCauley Service Bulletins 213 and 213A were issued January 20, 1994, and June 5, 1998, to provide improved lubrication and corrosion protection, as well as a built-in means of crack detection. According to SB213A, the recommended compliance time for propellers greater than 900 hours or 59-calendar months since last overhaul/penetrant inspection is within the next 100 hours, or at the next annual inspection, whichever occurs first. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12
Verbatim from NTSB's published report. Source file
NTSB_2002_LAX02LA104.txt.
Findings + structured fields enriched from FAA avall.mdb.
Full investigation docket on
data.ntsb.gov ↗.
Beyond the agency record
Search this event elsewhere.
Pre-filled searches into the sources where news + community discussion of aviation events lives. External sources are reported, not agency. Treat them as signal that something happened, not as fact about what happened.
Entity-clustered aviation events in the press — last 24 hr + 30-day archive.
Official agency record + docket.
Investigative docket: factual reports, photos, transcripts.
Long-running aviation incident database (Flight Safety Foundation).
Community NTSB synthesis blog — often has photos and witness reports.
Gold-standard aviation incident blog.
Aviation industry news search.
GA pilot forum — informed but rumor-prone.
GA pilot subreddit search.
Tail-number page — flight history (free tier limited).
AOPA Air Safety Institute search.
Mainstream press coverage. Recent events only.
Privacy-preserving news search.
External links open in a new tab. We don't ingest their content; we deep-link search queries.
Related research
What the literature says.
Academic papers and agency reports matching this event's aircraft type or causal vocabulary (stall, maintenance). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.
- Embry-Riddle Scholarly Commons 2023 · Conference paper
The Value of Strong Partnerships to Build a Successful Aviation Maintenance Career Pathway Program for Transitioning Military Service Members
The aerospace industry is competing with other industries for a qualified workforce, and many of those competing industries are investing heavily in creating workforce development pipelines.
- Embry-Riddle Scholarly Commons 2026 · Journal article (IJAAA)
From Reactive to Predictive: A hybrid Trust-Mediated Adoption Framework for Data-Driven Maintenance in Distributed-Authority Aviation Environments
Modern aviation maintenance operates within increasingly data-intensive technological environments, yet the operational integration of predictive maintenance into routine decision-making remains incon…
- NASA NTRS 2026 · Conference Paper
Computational Analysis of Steady State Aerodynamics of Transonic Truss-Braced Wing Configuration in Deep Stall
This study presents a computational investigation of steady state aerodynamics of the Subsonic Ultra-Green Aircraft Research (SUGAR) Transonic Truss-Braced Wing (TTBW) configuration over a wide range …
- Semantic Scholar 2025 · Article (Applied Sciences)
Decision-Making Framework for Aviation Safety in Predictive Maintenance Strategies
The implementation of predictive maintenance (PM) in aviation presents unique challenges due to strict safety requirements, complex operational environments, and regulatory constraints.
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
Low-Resource Automatic Speech Recognition Domain Adaptation – A Case-Study in Aviation Maintenance
With timeliness and efficiency being critical in the aviation maintenance industry, the need has been growing for smart technological solutions that optimize and streamline the different underlying ta…
- Embry-Riddle Scholarly Commons 2024 · Journal article (JAAER)
A New Trajectory in UAV Safety: Leveraging Reinforcement Learning for Distance Maintenance Under Wind Variations
In the field of aviation, safety is a critical cornerstone, and the operation of Unmanned Aerial Vehicle (UAV) systems is deeply connected with this principle.
Browse the full corpus — academia portal ↗