Skip to content

Atlas / NTSB / LAX05CA211

NTSB CAROL · Event

Event LAX05CA211

2005-06-17 Phoenix, Arizona, United States Airport · DVT None 1 aircraft Status: Completed

Registry · N617MA

FAA Aircraft Registry record.

Make / Model

AMERICAN CHAMPION AIRCRAFT 8GCBC

Year of manufacture

2003 · 2 years old at event

TCDS

A21CE · AMERICAN CHAMPION AIRCRAFT CORP

Engine

LYCOMING O-360 SERIES (180 hp)

Seats / Engines

3 seats · 1 engine

Last airworthiness date

20030614

ADS-B equipped

Yes — Mode-S A809D3

Registrant of record

AS THE CROW FLIES LLC

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

the pilot's inadequate compensation for the wind conditions and failure to maintain directional control during the landing rollout.

Factual narrative

On June 17, 2005, about 1300 mountain standard time, an American Champion 8GCBC, N617MA, ground looped at the Phoenix Deer Valley Airport (DVT), Phoenix Arizona. The pilot/owner was operating the airplane under the provisions of 14 CFR Part 91. The private pilot and one passenger were not injured; the airplane sustained substantial damage. The personal cross-country flight departed Albuquerque (ABQ), New Mexico, about 1030, with a planned destination of Phoenix. Visual meteorological conditions prevailed, and no flight plan had been filed. In a written statement, the pilot reported that he performed a standard wheel landing, and ground looped on the landing rollout due to unforeseen dust devil activity in the area. During the ground loop, the right wing, right wheel and landing strut, and right horizontal stabilizer were damaged from impact with the dirt off the side of the runway. The pilot stated that the airplane and engine had no mechanical failures or malfunctions during the flight. In a telephone conversation, a Federal Aviation Administration (FAA) inspector reported that he was at the Raytheon building at the time of the accident. He talked to the pilot after the accident, and the pilot stated to him that he ground looped. In his conversation, the FAA inspector stated that there might have been dust devil activity in the area. However, there was no dust devil activity on the runway at the time of the accident. The pilot was landing on runway 25. An aviation routine weather report (METAR) issued for Deer Valley at 1253 reported that the winds were from 160 degrees at 6 knots. The airplane ground looped during the landing rollout. The pilot was landing on runway 25. An aviation routine weather report issued for the airport 7 minutes before the accident reported that the winds were from 160 degrees at 6 knots. The pilot stated that the airplane and engine had no mechanical failures or malfunctions during the flight. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2005_LAX05CA211.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.