STC SA00888SE

Option 1: Install Walter M601-E11S engine and a Hartzell HC-B3TW-3/T10282N+4 propeller or a Walter M601-E11 engine and a Avia V508-E-AG 106/A propeller per Cascade Flying Service Master Drawing List CFS-MDL-0001 Rev G, dated June 15, 2004, and Cascade Flying Service Document CFS-IM-107, Rev A, dated July 29, 2003 Installation Instructions for Walter Turbine Installation on Air Tractor 300 & 400 Series Ag Aircraft or later FAA approved revisions to either of these documents. Option 2: Install a Walter M601-D11 engine and Avia V508-E-AG 106/A propeller per Cascade Flying Service Master Drawing List CFS-MDL-0001 Rev G, dated June 15, 2004, and Cascade Flying Service Document CFS-IM-107, Rev A, dated July 29, 2003 Installation Instructions for Walter Turbine Installation on Air Tractor 300 & 400 Series Ag Aircraft or later FAA approved revisions to either of these documents. NOTE: The Air Tractor model AT-400 and AT-402B airplanes are not eligible for modification under option

Historical Amended Aircraft Single-Engine Rev 06/18/2004 View PDF on drs.faa.gov ↗

What is an STC?

A Supplemental Type Certificate authorizes a major modification or alteration to an FAA-certificated aircraft. STCs are how operators legally install new avionics, change fuel systems, add floats, swap engines, etc. — every change beyond a minor modification needs one.

Applicable aircraft (11)

Certification basis — 14 CFR

Part 21

Specific sections

Sec. 111
Sec. 113
Sec. 115
Sec. 117
Sec. 119
Sec. 120
§ 21.25
§ 21.47

The STC PDF on drs.faa.gov is the authoritative document — it lists installation instructions, ICA requirements, and any limitations. Open PDF ↗