Skip to content

Type Record · As of May 3, 2026

LUSCOMBE 8

Fixed Wing Single Engine · CONT MOTOR C90 SERIES

Registered

11

Year Range

1938–1948

NTSB Events

6

Airworthiness Directives

19

01 /  Distribution

Where the fleet lives and was built

Counts of currently-registered LUSCOMBE 8 aircraft by US state and decade of manufacture, sourced from the FAA Aircraft Registry.

By State (top 10)

  • CA 45.5% 5
  • KS 9.1% 1
  • MN 9.1% 1
  • IN 9.1% 1
  • GA 9.1% 1
  • TX 9.1% 1
  • NC 9.1% 1

By Decade of Manufacture

  • 1930s 18.2% 2
  • 1940s 63.6% 7
  • Unknown 18.2% 2

02 /  NTSB Records

Events involving LUSCOMBE 8 aircraft

6 event(s) on file. Showing the most recent 6.

03 /  Airworthiness Directives

FAA directives applicable to LUSCOMBE 8

19 directive(s) on file. Showing the most recent 19.

  • Sep 19, 2017

    Airworthiness Directives; Ameri-King Corporation Emergency Locator Transmitters

    We are adopting a new airworthiness directive (AD) for certain Ameri-King Corporation emergency locator transmitters (ELTs) as installed on various aircraft. This AD was prompted by multiple reports of ELT failure and a report of noncompliance to quality standards and manufacturer processes related to Ameri-King Corpo…

  • Jun 3, 2016

    Airworthiness Directives; Ameri-King Corporation Emergency Locator Transmitters

    We propose to adopt a new airworthiness directive (AD) for certain Ameri-King Corporation emergency locator transmitters (ELTs) as installed on various aircraft. This proposed AD was prompted by multiple reports of ELT failure. This proposed AD was also prompted by a report of noncompliance to quality standards and ma…

  • Jun 7, 2005

    Airworthiness Directives; Precise Flight, Inc. Models SVS I and SVS IA Standby Vacuum Systems

    The FAA adopts a new airworthiness directive (AD) for all airplanes equipped with Precise Flight, Inc. (Precise Flight) Models SVS I and SVS IA standby vacuum systems (SVS) installed under certain supplemental type certificates or through field approval. This AD requires you to replace the airplane flight manual suppl…

  • Mar 4, 2005

    Airworthiness Directives; Precise Flight, Inc. Models SVS I and SVS IA Standby Vacuum Systems

    The FAA proposes to adopt a new airworthiness directive (AD) for all airplanes equipped with Precise Flight, Inc. (Precise Flight) Models SVS I and SVS IA standby vacuum systems (SVS) installed under certain supplemental type certificates or through field approval. This proposed AD would require you to replace the air…

  • Jan 19, 2005

    Airworthiness Directives; GARMIN International Inc. GTX 33, GTX 33D, GTX 330, and GTX 330D Mode S Transponders

    The FAA is adopting a new airworthiness directive (AD) to supersede Airworthiness Directive 2004-10-15, which applies to certain GTX 330 and GTX 330D Mode S transponders that are installed on airplanes. AD 2004-10-15 currently requires you to install GTX 330/330D Software Upgrade Version 3.03, 3.04, or 3.05. This AD a…

  • Oct 7, 2004

    Airworthiness Directives; GARMIN International Inc. GTX 33, GTX 33D, GTX 330, and GTX 330D Mode S Transponders

    The FAA proposes to supersede Airworthiness Directive (AD) 2004-10-15, which applies to certain GTX 330 and GTX 330D Mode S transponders that are installed on airplanes. AD 2004-10-15 currently requires you to install GTX 330/330D Software Upgrade Version 3.03, 3.04, or 3.05. This proposed AD applies to certain GTX 33…

  • May 21, 2004

    Airworthiness Directives; GARMIN International Inc. GTX 330 Mode S Transponders and GTX 330D Diversity Mode S Transponders

    The FAA adopts a new airworthiness directive (AD) for certain GARMIN International Inc. GTX 330/GTX 330D Mode S transponders that are installed on aircraft. This AD requires you to install GTX 330/330D Software Upgrade Version 3.03, 3.04, or 3.05. This AD is the result of observations that the GTX 330 and GTX 330D may…

  • Dec 30, 2003

    Airworthiness Directives; GARMIN International Inc. GTX 330 Mode S Transponders and GTX 330D Diversity Mode S Transponders

    The FAA proposes to adopt a new airworthiness directive (AD) for certain GARMIN International Inc. GTX 330/GTX 330D Mode S transponders. This proposed AD would require you to install GTX 330/ 330D Software Upgrade Version 3.03. This proposed AD is the result of observations that the GTX 330 and GTX 330D may detect, fr…

  • Jun 26, 2003

    Airworthiness Directives; Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) Series and HA-A2V20-1B Series Propellers with Aluminum Blades

    This amendment revises an existing airworthiness directive (AD), that is applicable to Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) series and HA-A2V20-1B series propellers with aluminum blades. That AD currently requires initial and repetitive dye penetrant and eddy current inspections of the blade and an optic…

  • Jan 2, 2003

    Airworthiness Directives; Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) Series and HA-A2V20-1B Series Propellers with Aluminum Blades

    The Federal Aviation Administration (FAA) proposes to revise an existing airworthiness directive (AD), applicable to Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) series and HA-A2V20-1B series propellers with aluminum blades. That AD currently requires initial and repetitive dye penetrant and eddy current inspect…

  • Nov 30, 1999

    Airworthiness Directives; Precise Flight, Inc. Model SVS III Standby Vacuum Systems

    This amendment adopts a new airworthiness directive (AD) that applies to all aircraft equipped with Precise Flight, Inc. Model SVS III standby vacuum systems installed in accordance with the applicable supplemental type certificate (STC) or through field approval. This AD requires incorporating revised operating limit…

  • Jul 7, 1999

    Airworthiness Directives; Precise Flight, Inc. Model SVS III Standby Vacuum Systems

    This document proposes to adopt a new airworthiness directive (AD) that would apply to all U.S. owners and operators of aircraft equipped with Precise Flight, Inc. Model SVS III standby vacuum systems installed in accordance with the applicable supplemental type certificate (STC) or through field approval. The propose…

  • Dec 3, 1997

    Airworthiness Directives; The Don Luscombe Aviation History Foundation Models 8, 8A, 8B, 8C, 8D, 8E, 8F, T-8F Airplanes; Correction

    This document clarifies information in airworthiness directive (AD) 96-24-17, which applies to Don Luscombe Aviation History Foundation (Luscombe) Models 8, 8A, 8B, 8C, 8D, 8E, 8F, T-8F airplanes. AD 96-24-17 currently requires installing new inspection holes, modifying the wing tip fairings, and inspecting the wing s…

  • Oct 10, 1997

    Airworthiness Directives; Teledyne Continental Motors E-165, E- 185, E-225, O-470 and IO-470 Series Reciprocating Engines

    This amendment adopts a new airworthiness directive (AD) that is applicable to Teledyne Continental Motors E-165, E-185, E-225, O-470 and IO-470 series reciprocating engines. This action supersedes priority letter AD 97-15-01 that currently requires removal from service of affected cylinders, and reassembly with servi…

  • Aug 27, 1997

    Airworthiness Directives; Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) Series and HA-A2V20-1B Series Propellers With Aluminum Blades

    This amendment supersedes four existing airworthiness directives (ADs), applicable to Hartzell Propeller Inc. ( )HC-( )(2,3)(X,V)( )-( ) series propellers with aluminum blades, that currently require inspections for cracks in blade shanks and clamps. This amendment requires initial and repetitive dye penetrant and edd…

  • May 29, 1996

    Airworthiness Directives; The Don Luscombe Aviation History Foundation Model 8 Series Airplanes.

    This document proposes to adopt a new airworthiness directive (AD) that would apply to The Don Luscombe Aviation History Foundation (referred to as Luscombe from hereon) Model 8 series airplanes. The proposed action would require installing new inspection holes, modifying the wing tip fairings, and inspecting the wing…

  • Nov 1, 1994

    Airworthiness Directives; Luscombe Model 8 Series Airplanes; Correction

    This action makes a correction to Airworthiness Directive (AD) 94-16-02 concerning Luscombe Model 8 series airplanes, which was published in the Federal Register on August 11, 1994 (59 FR 41237). That publication inadvertently referenced the existing vertical stabilizer forward attach fittings as aluminum. Two of the…

  • Aug 25, 1994

    Airworthiness Directives; Brackett Aircraft Company, Inc.; Air Filter Assemblies Installed on Airplanes

    This document proposes to adopt a new airworthiness directive (AD) that would apply to airplanes with certain Brackett Aircraft Company, Inc. (Brackett) air filter assemblies incorporating a neoprene gasket design installed between the carburetor heat box and the air filter frame. The proposed action would require rep…

  • Mar 3, 1994

    Airworthiness Directives; Teledyne Continental Motors Models C75, C85, C90, C125, C145, O-200, O-300, and GO-300 Series Reciprocating Engines

    This amendment adopts a new airworthiness directive (AD), applicable to Teledyne Continental Motors (TCM) Models C75, C85, C90, C125, C145, O-200, O-300, and GO-300 series reciprocating engines, that requires inspection of the cylinder rocker shaft bosses for cracks, and inspection of the cylinder rocker shaft for loo…

04 /  Type Certificate Data Sheets

FAA TCDS for LUSCOMBE 8

The TCDS is the legal certification document — weight limits, performance, equipment, AD compliance times, operating limitations. 1 match in the FAA catalog.

  • A-694 Historical Rev 23 · 07/08/1993

    Don Luscombe Aviation History Foundation Inc.

    Models: 8, 8D, 8A, 8F + 4 more

05 /  Special Airworthiness Information Bulletins

Advisories applicable to LUSCOMBE 8

1 SAIB on file. SAIBs are FAA advisory notices — not mandatory like ADs, but worth reviewing for service bulletins and emerging issues.

06 /  Supplemental Type Certificates

Modifications approved for LUSCOMBE 8

49 STCs on file — every FAA-approved modification, alteration, or installation for this aircraft. STOL kits, avionics, fuel systems, floats, engine swaps, you name it.

  • 09/26/2024

    STC SA02594SE

    SkyView HDX Instrumentation and Autopilot System manufactured

    Dynon Avionics

  • 08/19/2024

    STC SA03898NY

    Installation and maintenance of ORATEX covering and coating material

    Aircraft Design & Certification Ltd

  • 05/17/2024

    STC SA4503NM (PAGE 1)

    Remove original cloth covering and install Ceconite covering

    Ceconite Division of Poly-Fiber Inc.

  • 10/12/2022

    STC SA02594SE

    SkyView HDX Instrumentation and Autopilot System manufactured

    Dynon Avionics

  • 09/09/2022

    STC SA4503NM (PAGE 1)

    Install Ceconite covering material.

    Ceconite Division of Poly-Fiber Inc

  • 09/01/2022

    STC SA01967WI (2 OF3)

    Use of GAMI G100UL High Octane Unleaded Avgas

    General Aviation Modifications Inc.

  • 05/19/2022

    STC SA04776NY (1 OF 2)

    The HIPEC Covering and Finishing System must be performed and maintained

    HIPEC Aircraft Coatings Inc.

  • 01/28/2022

    STC SA03898NY

    Installation and maintenance of ORATEX covering and coating material

    Aircraft Design & Certification Ltd

  • 09/16/2021

    STC SA02553AK

    Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener

    Keller Engineering Group LLC

  • 09/16/2021

    STC ST02291AK-A

    Fabrication and installation of a Tail Wheel Anti-Shimmy Dampener

    Keller Engineering Group LLC

  • 02/26/2021

    STC SA01093WI

    Modification of flap operation mechanism. Install according to Renaissance Aircraft LLC Top Drawing R282315, Revision A, or later FAA approved revisions.

    Luscombe Aircraft Corporation

  • 02/26/2021

    STC SA01049WI

    Replacement of existing engine with a Continental 0-200-A or O-200-C and suitable propeller in accordance with The Don Luscombe Aviation History Foundation DLAHF Document 0-200 dat…

    Luscombe Aircraft Corporation

  • 02/26/2021

    STC SA01094WI

    Installation of a hydraulic brake system

    Luscombe Aircraft Corporation

  • 02/26/2021

    STC SA3215NM

    Fabrication and installation of pilot's and co-pilot's seat.

    Luscombe Aircraft Corporation

  • 02/26/2021

    STC SA2500SO

    Fabrication and installation of front stabilizer attach fitting

    Luscombe Aircraft Corporation

  • 02/26/2021

    STC SA00940LA

    Installation of overhead inertia reel shoulder harnesses for pilot and passenger.

    Luscombe Aircraft Corporation

  • 01/09/2020

    STC SA2500SO

    Fabrication and installation of front stabilizer attach fitting

    Luscombe Aircraft Corporation

  • 07/16/2019

    STC SA01861SE (PAGE 2)

    Fabrication and installation of Landing Light Controller

    Seaton Engineering Corp.

  • 07/16/2019

    STC SA01800SE (PG 2)

    Fabrication and installation of new or replacement of existing instrument panel lights dimmer control.

    Seaton Engineering Corp.

  • 07/14/2017

    STC SA01800SE (PG 2)

    Fabrication and installation of new or replacement of existing instrument panel lights dimmer control.

    Seaton Engineering Corp.

  • 06/04/2015

    STC SA00478CH

    Installation of Cooper Superflite 102 Fabric.

    Aviation Products Systems Inc.

  • 10/10/2012

    STC SA02825NY Page 1

    Installation of Aerospace Logic Aircraft Instruments

    Aerospace Logic Inc.

  • 05/10/2012

    STC SA00478CH

    Installation of Cooper Superflite 102 Fabric.

    Aviation Products Systems Inc.

  • 12/01/2011

    STC SA01861SE (PAGE 2)

    Fabrication and installation of Landing Light Controller

    Seaton Engineering Corp.

  • 12/01/2011

    STC SA01800SE (PG 2)

    Fabrication and installation of new or replacement of existing instrument panel lights dimmer control.

    Seaton Engineering Corp.

  • 10/19/2011

    STC SA00478CH (PAGE 2)

    Installation of Cooper Superflite 102 Fabric.

    Aviation Products Systems Inc.

  • 09/14/2011

    STC SA00478CH (PAGE 2)

    Installation of Cooper Superflite 102 Fabric.

    Aviation Products Systems Inc.

  • 02/25/2011

    STC SA4503NM (Page 1)

    Install Ceconite covering material.

    Ceconite Division of Poly-Fiber Inc

  • 02/01/2010

    STC SA00478CH (PAGE 2)

    Installation of Cooper Superflite 102 Fabric.

    Aviation Products Systems Inc.

  • 09/18/2009

    STC SA00478CH (PAGE 2)

    Installation of Cooper Superflite 102 Fabric.

    Aviation Products Systems Inc.

+ 19 more STCs on file

07 /  PMA replacement parts

FAA-approved replacement parts for LUSCOMBE 8

60+ parts on file from the FAA Parts Manufacturer Approval database. Each is a non-OEM part the FAA has authorized for use as a replacement on this aircraft type.

  • U2035A-000#https://drs.faa.gov/browse/excelExternalWindow/CB533809C173B51486257FE90062502E.0001##

    Felt

    Univair Aircraft Corp replaces Scott 2035

    PMA holder →
  • Ontic 2716-00-ONT#https://drs.faa.gov/browse/excelExternalWindow/CB77FF030FDC16C486257EDE00518BE8.0001##

    Aerotherm - Air Temperature Gage

    ONTIC Engineering & Manufacturing Inc replaces Avox 2716-00

    PMA holder →
  • 13343-01#https://drs.faa.gov/browse/excelExternalWindow/14049E52D3EE355086257C6E0076FBA7.0001##

    Oil Pressure Gauge

    ONTIC Engineering & Manufacturing Inc replaces Stewart Warner P/N 10580

    PMA holder →
  • 13340-00#https://drs.faa.gov/browse/excelExternalWindow/017D428A2598525786257C6E0076FB4E.0001##

    Oil Temperature Gauge

    ONTIC Engineering & Manufacturing Inc replaces Stewart Warner P/N 10580

    PMA holder →
  • 18380-X-AA#https://drs.faa.gov/browse/excelExternalWindow/8D0A3972F0BEAB9B862571C4006B27B9.0001##

    Bushing, Landing Gear

    Antique Aluminum LLC replaces 18380

    PMA holder →
  • 18068-X-AA#https://drs.faa.gov/browse/excelExternalWindow/DA4F4529B9BD7962862571C4006B27E5.0001##

    Escutcheon, Fuel Valve

    Antique Aluminum LLC replaces 18068

    PMA holder →
  • 581033-10-AA#https://drs.faa.gov/browse/excelExternalWindow/BCE5D5400693CF2F862571C4006B278D.0001##

    Sub Panel, Instrument

    Antique Aluminum LLC replaces 581033-10

    PMA holder →
  • 586165-2-AA#https://drs.faa.gov/browse/excelExternalWindow/49D87A88FB3998D3862571C4006B275F.0001##

    Escutcheon Tank Usage

    Antique Aluminum LLC replaces 586165-2

    PMA holder →
  • 586165-1-AA#https://drs.faa.gov/browse/excelExternalWindow/C14CF0BC9C074D56862571C4006B272D.0001##

    Escutcheon, Tank Usage

    Antique Aluminum LLC replaces 586165-1

    PMA holder →
  • 186161-AA#https://drs.faa.gov/browse/excelExternalWindow/8DEA5825D3A6AE33862571C4006B26FF.0001##

    Escutcheon, Fuel Usage

    Antique Aluminum LLC replaces 186161

    PMA holder →
  • 486233-AA#https://drs.faa.gov/browse/excelExternalWindow/CA0EAE5935B3AEA7862571C4006B268D.0001##

    Escutcheon, Flap Speed

    Antique Aluminum LLC replaces 486233

    PMA holder →
  • 18067-AA#https://drs.faa.gov/browse/excelExternalWindow/62288495FBE4142C862571C4006B26BA.0001##

    Escutcheon, Name Plate

    Antique Aluminum LLC replaces 18067

    PMA holder →
  • 185009-AA#https://drs.faa.gov/browse/excelExternalWindow/EBE6DE08809F2535862571C4006B2624.0001##

    Escutcheon, Trim Indicator

    Antique Aluminum LLC replaces 185009

    PMA holder →
  • 288101-AA#https://drs.faa.gov/browse/excelExternalWindow/2BF1AA6449C5F875862571C4006B265B.0001##

    Escutcheon, Tail Name Plate

    Antique Aluminum LLC replaces 288101

    PMA holder →
  • 18365-AA#https://drs.faa.gov/browse/excelExternalWindow/4EDA5577CAD2BEF9862571C4006B258B.0001##

    Escutcheon, Oleo Oil

    Antique Aluminum LLC replaces 18365

    PMA holder →
  • 18863-X-AA#https://drs.faa.gov/browse/excelExternalWindow/D9D211A822419BD6862571C4006B255E.0001##

    Escutcheon, Park Brake

    Antique Aluminum LLC replaces 18863

    PMA holder →
  • BB-120-AA#https://drs.faa.gov/browse/excelExternalWindow/27F1277A4824F246862571C30057A7E8.0001##

    Pulley

    Antique Aluminum LLC replaces BB-120

    PMA holder →
  • A-167-1-AA#https://drs.faa.gov/browse/excelExternalWindow/AD011F792D450EE0862571C30057A81D.0001##

    Pulley

    Antique Aluminum LLC replaces A-167-1

    PMA holder →
  • S-36-X-AA#https://drs.faa.gov/browse/excelExternalWindow/D9C55299FE6AC301862571C30057A7B9.0001##

    Gasket

    Antique Aluminum LLC replaces S-36

    PMA holder →
  • R1710000-011#https://drs.faa.gov/browse/excelExternalWindow/577378E6F71712C9862579E4005A9ADB.0001##

    Visor Assembly, Tube Mount

    Rosen Sunvisor Systems, LLC replaces Modification Part

    PMA holder →
  • MA8001#https://drs.faa.gov/browse/excelExternalWindow/64A9690AA8AE60718625796B0066F8B0.0001##

    Limitations Placard

    Micro Aerodynamics Inc replaces Modification Part

    PMA holder →
  • Type #1002 MA1002#https://drs.faa.gov/browse/excelExternalWindow/6F6E1C0D1CAEAF618625796B0066F880.0001##

    Vortex Generator

    Micro Aerodynamics Inc replaces Modification Part

    PMA holder →
  • Type #1101 MA1101#https://drs.faa.gov/browse/excelExternalWindow/653838E97858D6618625796B0066F857.0001##

    Vortex Generator

    Micro Aerodynamics Inc replaces Modification Part

    PMA holder →
  • Type #1001 MA1001#https://drs.faa.gov/browse/excelExternalWindow/0D307AF4146C2F068625796B0066F827.0001##

    Vortex Generator

    Micro Aerodynamics Inc replaces Modification Part

    PMA holder →
  • U286094-101#https://drs.faa.gov/browse/excelExternalWindow/9120A4DE5A2E4BB3862577DF007746D7.0001##

    Fuel Valve Bracket

    Univair Aircraft Corp replaces Luscombe p/n 286094

    PMA holder →
  • U286094-000#https://drs.faa.gov/browse/excelExternalWindow/4E627FCF7AD5A631862577DF007746A5.0001##

    Fuel Valve Assembly

    Univair Aircraft Corp replaces Luscombe p/n P25A-2

    PMA holder →
  • KEG-117#https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID366992904420211021172604.0001##

    Shimmy Dampener 3200 Bent Assembly

    ABI LLC replaces Modification Part

    PMA holder →
  • KEG-116#https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID395372557202110211725360.0001##

    Shimmy Dampener 3200 Straight Assembly

    ABI LLC replaces Modification Part

    PMA holder →
  • KEG-118#https://drs.faa.gov/browse/excelExternalWindow/DRSDOCID277458884220211021172636.0001##

    Shimmy Dampener 3200 Bent Assembly

    ABI LLC replaces Modification Part

    PMA holder →
  • 086114-6#https://drs.faa.gov/browse/excelExternalWindow/7FC66E9D6946AC84862571B50056F72C.0001##

    Fuel Cell Assembly

    Eagle Technologies Company replaces 086114-1, 086114-11 The Don Luscombe Aviation History Foundation, Inc.

    PMA holder →
  • 086114-5#https://drs.faa.gov/browse/excelExternalWindow/27164B04BA859CD5862571B50056F6F8.0001##

    Fuel Cell Assembly

    Eagle Technologies Company replaces 086114, 086114-10 The Don Luscombe Aviation History Foundation, Inc.

    PMA holder →
  • TPH PN-1#https://drs.faa.gov/browse/excelExternalWindow/9496DA2CF7F30BEA862578E800662BEB.0001##

    Tail Pull handle

    BAS Incorporated replaces Modification Part

    PMA holder →
  • PN 5-8-R1 (L-R Opp)#https://drs.faa.gov/browse/excelExternalWindow/5229FF5884AF49F2862578E800662811.0001##

    Lap Belt Attach Link

    BAS Incorporated replaces Modification Part

    PMA holder →
  • PN 3-8-R1#https://drs.faa.gov/browse/excelExternalWindow/DFC4DE464196BD66862578E8006627E6.0001##

    Tension Strap

    BAS Incorporated replaces Modification Part

    PMA holder →
  • PN 2-8-R1#https://drs.faa.gov/browse/excelExternalWindow/3970B960D1504A95862578E8006627BA.0001##

    Support Bracket

    BAS Incorporated replaces Modification Part

    PMA holder →
  • PN 1-8-R1#https://drs.faa.gov/browse/excelExternalWindow/E7FAA220214C1E71862578E80066278E.0001##

    Mounting plate

    BAS Incorporated replaces Modification Part

    PMA holder →
  • SC-W/G-2033-150#https://drs.faa.gov/browse/excelExternalWindow/9751FD116199A11A8625767E0063C7C9.0001##

    LUSCOMBE 8 WINDSHIELD

    Great Lakes Aero Products replaces 081105-2

    PMA holder →
  • SC-W/T-2033-150#https://drs.faa.gov/browse/excelExternalWindow/A83D87C2F8C17F258625767E0063C797.0001##

    LUSCOMBE 8 WINDSHIELD

    Great Lakes Aero Products replaces 081105-2

    PMA holder →
  • W/G-2033-150#https://drs.faa.gov/browse/excelExternalWindow/426C7A35229E29918625767E0063C76A.0001##

    LUSCOMBE 8 WINDSHIELD

    Great Lakes Aero Products replaces 081105-2

    PMA holder →
  • W/T-2033-150#https://drs.faa.gov/browse/excelExternalWindow/F7EFEB0F933F36098625767E0063C740.0001##

    LUSCOMBE 8 WINDSHIELD

    Great Lakes Aero Products replaces 081105-2

    PMA holder →

+ 20 more PMA parts on file

05 /  Aircraft of this type

All 11 registered N-numbers

Every tail currently on the FAA registry for this make/model. Click an N-number to query the FAA Aircraft Inquiry; rows flagged have NTSB events on file. Tails seeded with full TallyAero pages link directly.

11 of 11
N-number St Year NTSB FAA
N1837B KS 1948 Look up ↗
N1962B MN 1948 Look up ↗
N20663 CA · Look up ↗
N20687 CA 1938 Look up ↗
N2108B CA 1948 · Look up ↗
N22013 CA 1938 · Look up ↗
N2331K IN 1947 · Look up ↗
N25264 GA 1940 · Look up ↗
N45631 CA Look up ↗
N71226 TX 1946 · Look up ↗
N71532 NC 1940 · Look up ↗

Source — FAA Aircraft Registry · click "Look up" to query the live registry record (owner, address, last airworthiness)

05 /  Sources & Methodology

Every count traces back to a primary US-government source

We render counts and lists as the agency publishes them. Read the methodology →