Skip to content

Atlas / NTSB / ANC97LA072

NTSB CAROL · Event

Event ANC97LA072

1997-05-18 ANCHORAGE, Alaska, United States Airport · Z40 None 1 aircraft Status: Completed

Registry · N5668E

FAA Aircraft Registry record.

Make / Model

CESSNA 150

Year of manufacture

1959 · 38 years old at event

Engine

CONT MOTOR 0-200 SERIES (100 hp)

Seats / Engines

2 seats · 1 engine

Last airworthiness date

19590124

ADS-B equipped

Yes — Mode-S A740A9

Registrant of record

GREENE DANIEL W

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

failure of the pilot to maintain directional control of the airplane during a touch-and-go landing. Factors associated with the accident were: the rough/uneven runway, and a berm.

Factual narrative

On May 18, 1997, about 1250 Alaska daylight time, a wheel equipped Cessna 150, N5668E, crashed during landing at the Goose Bay airstrip, about 9 miles northwest of Anchorage, Alaska. The airplane was being operated as a visual flight rules (VFR) local area instructional flight when the accident occurred. The airplane, operated by Alaska Air Academy, Anchorage, sustained substantial damage. The student pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed. The flight originated at the Lake Hood Strip, Anchorage, about 1120. In a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on May 18, 1997, the Director of Operations reported the student pilot was practicing touch and go landings. The airplane had been modified to a Texas Taildragger (tail-wheel) configuration. During a landing on runway 25, the student touched down on a rutted area of the runway. The pilot added power to begin a takeoff, but the airplane began to drift toward the left. The pilot added full right rudder, but the airplane continued toward the left. The pilot aborted the takeoff, and the airplane swerved off the left side of the runway and collided with a berm. The airplane received damage to the main landing gear and propeller. The Director of Operations inspected the airplane after the accident. He reported no malfunction of the airplane's rudder cables. The student pilot had accrued 27 hours of total instruction, all accrued in the accident airplane. An NTSB pilot/operator report (NTSB form 6120.1/2) was not returned by the operator. The student pilot was practicing touch-and-go landings in a tailwheel equipped airplane. After touchdown on a rutted portion of the runway, the pilot added full power to takeoff again. The airplane began to drift toward the left. Full application of right rudder did not correct the left drift. The student aborted the takeoff, but the airplane swerved off the left side of the runway, and collided with a berm. The student had accrued 27 hours of total instruction. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_1997_ANC97LA072.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

What the literature says.

Academic papers and agency reports matching this event's aircraft type or causal vocabulary (icing). Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.

Browse the full corpus — academia portal ↗