Skip to content

Atlas / NTSB / CHI07CA244

NTSB CAROL · Event

Event CHI07CA244

2007-07-31 Columbia, Missouri, United States Minor 1 aircraft Status: Completed

Registry · N9ZV

FAA Aircraft Registry record.

Make / Model

BELL 206B

TCDS

H2SW · BELL HELICOPTER TEXTRON CANADA LTD

Engine

ALLISON 250-C20 SER (420 hp)

Seats / Engines

5 seats · 1 engine

Last airworthiness date

20010710

ADS-B equipped

Yes — Mode-S AC6CCD

Registrant of record

L& R INVESTMENT PARTNERS LLC

Source: FAA Aircraft Registry (releasable master file).

Aircraft involved

Probable cause & findings

The pilot's failure to maintain control of the helicopter, which resulted in impact with terrain during takeoff. A factor in the accident was the tall grass.

Factual narrative

The helicopter was substantially damaged when it impacted terrain during takeoff. The pilot stated that the helicopter was to be loaded with one passenger in the left seat and a 167 lb part behind the pilot. The part was loaded onto the helicopter and the pilot was then informed that the passenger would not be riding in the helicopter. Because of a "time deadline," the pilot decided to fly the helicopter from the left seat instead of the right in order to "have a good lateral C.G." During takeoff, the pilot reported that the helicopter started "sinking toward the ground" and that he was "over controlling the cyclic." The helicopter's skids came in contact with tall grass and tipped "very far forward." The pilot tried to level the helicopter with the cyclic, the tail "fell rapidly," and the helicopter subsequently impacted terrain and rolled over on its right side. The pilot stated in his accident report that the accident could have been prevented had he taken the time to get help to move the load to the co-pilot's side. He reported that it would have solved his lateral C.G. problem and he would be flying the helicopter from his normal position. The helicopter was substantially damaged when it impacted terrain during takeoff. The pilot stated that the helicopter was to be loaded with one passenger in the left seat and a 167 lb part behind the pilot. The part was loaded onto the helicopter and the pilot was then informed that the passenger would not be riding in the helicopter. Because of a "time deadline," the pilot decided to fly the helicopter from the left seat instead of the right in order to "have a good lateral C.G." During takeoff, the pilot reported that the helicopter started "sinking toward the ground" and that he was "over controlling the cyclic." The helicopter's skids came in contact with tall grass and tipped "very far forward." The pilot tried to level the helicopter with the cyclic, the tail "fell rapidly," and the helicopter subsequently impacted terrain and rolled over on its right side. The pilot stated in his accident report that the accident could have been prevented had he taken the time to get help to move the load to the co-pilot's side. He reported that it would have solved his lateral C.G. problem and he would be flying the helicopter from his normal position. Source: NTSB Aviation Accident Database (Pre-2008 Archive) Retrieved: 2026-02-12

Verbatim from NTSB's published report. Source file NTSB_2007_CHI07CA244.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.