Skip to content

Atlas / NTSB / WPR12CA344

NTSB CAROL · Event

Event WPR12CA344

2012-08-05 Colville, Washington, United States Airport · 63S None 1 aircraft Status: Completed

Aircraft involved

Probable cause & findings

The pilot's lack of experience in the helicopter, which resulted in his failure to maintain ground clearance during the taxi hover, followed by inadvertent ground contact and rollover.

Factual narrative

The private pilot with an airplane single-engine land rating was learning to fly his son's experimental amateur-built helicopter, and had accumulated about 20 hours in type. His plan for the day was to conduct solo hover practice. After about 20 minutes of hover practice on a grass runway at the non-towered airport, he began hover-taxiing the helicopter back to its hangar. As he approached the hangar area, he realized that the helicopter had excessive speed for an upcoming turn, and the pilot tried to slow the helicopter down. However, instead of just decelerating, the helicopter settled to the ground. At the time the helicopter contacted the ground, it had some lateral translation. One of the skids caught on the ground, and the helicopter rolled over onto its left side. The pilot shut down the helicopter and extracted himself. The main rotors, tail boom, and one skid were substantially damaged, but the pilot was uninjured. The pilot stated that there were no pre-event mechanical problems or abnormalities with the helicopter, and that his inexperience in the helicopter was the reason for the accident. The private pilot with an airplane single-engine land rating was learning to fly his son's experimental amateur-built helicopter and had accumulated about 20 hours in type. His plan for the day was to conduct solo hover practice. After about 20 minutes of hover practice on a grass runway at the non-towered airport, he began hover-taxiing the helicopter back to its hangar. As he approached the hangar area, he realized that the helicopter had excessive speed for an upcoming turn, and the pilot tried to slow the helicopter. However, instead of just decelerating, the helicopter settled to the ground. At the time the helicopter contacted the ground, it had some lateral translation. One of the skids caught on the ground, and the helicopter rolled over onto its left side. The pilot shut down the helicopter and extracted himself. The main rotor blades, tailboom, and one skid were substantially damaged, and the pilot was uninjured. The pilot stated that there were no preaccident mechanical malfunctions or failures with the helicopter that would have precluded normal operation and that his inexperience in the helicopter resulted in his inability to control it during the taxi. Source: NTSB Aviation Accident Database Retrieved: 2026-02-12

NTSB Findings

Hierarchical cause / factor breakdown from the FAA bulk avdata database. Each finding tagged C (Cause) or F (Factor).

  • C Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot - C
  • C Environmental issues-Physical environment-Terrain-(general)-Response/compensation - C
  • C Personnel issues-Experience/knowledge-Experience/qualifications-Total experience w/ equipment-Pilot - C

Verbatim from NTSB's published report. Source file NTSB_2012_WPR12CA344.txt. Findings + structured fields enriched from FAA avall.mdb. Full investigation docket on data.ntsb.gov ↗.

Related research

What the literature says.

Academic papers and agency reports matching this event's aircraft type. Sourced from NASA NTRS, NTSB Safety Studies, FAA CAMI, AOPA Air Safety Institute, Embry-Riddle Scholarly Commons, arXiv, and the Semantic Scholar academic graph.

Browse the full corpus — academia portal ↗